kunsx

Thanks for the answers, I am away from home at work but I will certanly check out the O2 sensor and change to new spark plugs when I get back.

Just got my "new" engine started in my 521 pick up and was a bit dissapointed since the power only was around 100hk in the dyno bench. The engine is from a truck but I have replaced the inlet manifold with one from a Nissan Prairie. There is KMS engine management system and is tuned in a dyno bench. There is a few things I think of myself, 1: To small exhaust- only 2" so get that rebuild to 2,5" 2: Myabe my O2 sensor is not working right or temp sensor- to be checked out. 3: I have the complete cylinder head of the Prairie engine- get that one ported and planed 1-2mm and replace. Any ideas is much apreciated.

Hi just what I need, can you send it to me in Norway?

Still haven`t got one so if anybody got one for sale and will send it to Norway I`ll be very happy:

Thanks:)

Yes but not possible to get new anymore.

Anyone who can help me out with a pitman arm for the steering gear to a 521 pick up, I have sent loads of mails to different Nissan dealers but I dont think its possible to get new anymore. I damaged the one I had and need a new one to get the car on the road again. So if someone have one I will be very pleased. I also need a 280zx power steering gear 79-81 model. mail:ronny9088@hotmail.com Ronny

Hi do you have one for sale?

Rebuilding my steering and I need a pitman arm for 521 pick up. Anyone who can help with that? I have searched for new with no result. As far as I know the 620 should also fit but not possible to get new anymore. Ronny Norway

5 speed thats correct, bought it with that engine, but the power brakes I just put in myself. J engine originally. 1971 model this one and the car is left hand drive like normal in Norway. I`m

Here is the speedometer

Thanks, I have to check the torsion bar adjustment tomorrow then. Here some updating pictures Speedometer with GPS speed sensor from speedhut

Today I have been out and tried the car, but I think I have a problem with the suspension, I changed the fulcrum pins and nuts to new and I see someone wrote here that they have to go back in same place as they came off, but mine are new and I couldn`t see any difference in the threads, they all looked similar. But the suspension is very stiff so I suspect there is somthing wrong with the "adjustment or assembling" of the fulcrum pins. Any body who got any good idea? Ronny

Thanks, Yes its made of aluminium, Im not sure from what car, I`ll take some pics of it. Just mounted new seats in it tonight.

Hi, there again, thanks for answer and help, think I have some pics of my project ongoing. Powdercoating the parts Flocking dashboard parts I will update in a few days :geek: