Jump to content

severed520

New Members
  • Posts

    16
  • Joined

  • Last visited

About severed520

  • Birthday 03/03/1979

Profile Information

  • Location
    Destrehan LA
  • Cars
    67 520 91 crew cab dually 95 c1500 98 s-10
  • Interests
    trucks, cars anything automotive,and fishing
  • Occupation
    body man/painter

severed520's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. I got it back in place after taking it all the way out as a unit then wiggled the worm gear back pressedin the seal and all is good to go. Thanks for all your help
  2. I tried every thing I guess I need to take it off the frame and try to figure it out on the bench
  3. That's what it seems like farmer Joe. I hope someone else has a solution.
  4. Today while working on my 1967 520 I decided to pull the dash. I took the 2 bolts under the dash for the column and decided I was going to pull the whole column out and paint the inside of the cab well I unbolted the three bols holding the column to the gear box and this is where my problem lies. The column only comes out about 1/4 of an inch. So I try to put it back and it won't go back. Is there a trick to it I have been trying to either get it back in place or take it out for the last 2 hours. I have been a lurker for a while and tried to search with no help, so I figured one of you datsun gods would know the answer.
  5. Is dual headlight grille and do you have any pictures?
  6. How much did you narrow the front end?
  7. To bad you are not closer I need the hood.
  8. Tdaaj is holding some fenders for me, I would also like to get the 67 520 front bumper and brackets. Let me know.
  9. What year is that rear end from? And what year front clip are you useing? I am trying to decide if I want to clip mine or use the factory stuff. I can get a complete rolling chassis from a 1975 toyota truck for 200.00. So I am thing for that price O might as well do it since it has disc brakes and all.
  10. Here is a link to get the carb rebuild kits http://store.classicgarage.com/5201.html I just recieved the on for my nikki carb. They have the one you need also.
  11. Did you take 2 inches off each side or 2 inches total meaning 1 inch per side?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.