Jump to content

subedats

Members
  • Posts

    50
  • Joined

  • Last visited

About subedats

  • Birthday 01/06/1989

Profile Information

  • Location
    Sierra Vista AZ
  • Cars
    76 Datsun 620 & 06 WRX

subedats's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. I did it with them together. I had to remove the lower crossmember (under the oil pan), the tranny crossmember, and I also had to take off the valve cover. that should make it pretty easy. My friend and I did it from start to finish in about 4 hours.. But then again I labled EVERYTHING and it was my first time doing it.
  2. Hey i'll take them if you bring them when you come get the motor. Edit: what size are they
  3. I just put in that griffin from ^^^ in my 76 620. and it fits good. had to make all of the brackets and had to cut the lower tube off the radiator and weld it straight to make it fit around the alternator. but other then that and making my own hoses it seems like a good fit.
  4. Thanks everyone but i figured it out... I accidentally hooked up my starter and alt cables backwords... but yeah in the process of frying the dizzy wire I fried everything in side the distributer.. so yeah im just going to switch to electronic ingnision. So I got it to crank and everything so it should be good when i get my EI so yeah and fiveNdime I think hooking up my EI will be alot easyier from your diagram.
  5. 76' 620. 2.2L stroker well I go and try to start my motor last night.. have all the wires hooked up in the right place im pretty sure and go to crank it and its a no go.. well after dubble checking everything and charging the battery try it again and nothing happens. so well the only wires i think i have mixed up are on the alternator. now i got the T plug in the right place and the battery cable in the right place.. Im just not sure where the white and red wire goes.(hooked it up to the battery cable on alt) and the black wire(just hooked it up to what i think its a ground...) well if anyone has any pictures of their alt and where the wires go that would be great. I have looked at a coupple of wireing diagrams And when i tryed to start it the third time i melted the red wire that goes to the distributer.. what could have caused this? mixing up the wires on the alt? Any help would be nice. Thank you Merced Oh and here's my number if any one can help. should be working in about 2 hours. and going all night. 520-678-0058 even send me a picture on my phone if you want.
  6. subedats

    New engine

    well i just put in a 2.2l stroker in mine.. dont know how it runs yet but i should be starting it today so i will let you know how it is but thats what i chose.
  7. I know i just went there right now cuz i forgot where each alternator wire went and i have nothing to look at.... so mad... guess i will just figure it out.. so mad.
  8. is all that rust included.. or is that a custom paint color?:D
  9. how happy are you with your motor? mine gets back on wednesday so im just wondering..
  10. MAKE SURE TO BENCH BLEED IT!! just to let you know and not forget.. i made that mistake...:blush:
  11. im wondering what kind of radiator cap i should use for my aplication? or does it even matter. L20B 2.2 L stroker 16X 24 in griffin radiator I just dont know what size(Psi) i should use... thank you Merced
  12. hey its only like 3 days away you can do it.jk
  13. yeah I say if you going to use bondo do it the right way start from bare metal and degrese it all then just build in layers less then 1/8 inch thick at a time my rule of thumb is dont use it more than a 1/4 inch thick because then it may crack. but if done the right way it will turn out amazing. just make sure its sanded good probably finish about 320 grit other wise you will see it and all of the sand scratch. Just think all of those show cars that you see on tv and such all have bondo on them. thats why their so straight. just my 2 cents
  14. well if he dosent want it you can have it. we'll see cuz he just wants the core support so who knows
  15. sorry motor is already gone.. and no rear view mirror.. hears the link to my truck and everything. I just want the whole thing gone but i think flat black is taking it all. http://forum.ratsun.net/showthread.php?t=4601
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.