RedBanner

your already so far past that man. Good work.

Not my first cheap a10 wagon, but my most recent. http://www.nwdatsuns.com/viewtopic.php?f=6&t=1325

congrats, keep up the good work.

id don't have any more info than that sorry. I ordered the "ultralight 4 piston " calipers from wilwoods website. they have them for several thickness of rotors. those are 13s, and you can see I have lots of room, some wheels fit different. my steering knuckle and outer tie rod are closer than my caliper, the the wheel

I'm running the mkclots/morrisun front brakes, they fit under 13" turbines with minor caliper shaping. another, more indepth swap could be zx struts with a wildwood ultralight 4 piston caliper for a 3/4 width rotor. its a smaller caliper that works alittle different than the zx caliper, so you can move it in real close for clearance. 13x7et0 libre has plenty of room df, I had to use a 210 centerlink, pitman arm, and steering arm, (in an emergency) i found that the centerlink was 14plus mm wider from inner tierod to inner tierod. i figured it was becase the lca pivot was moved outward slaightly. about 8-10mm per side. i think that is why people assume it would widen the width, because the track width is wider, but extended between the lca pivots and inner tie rods.