jdmdime

Converted to ir ka alt. I did the jumper on the external reg plug and rewired the t connector to the ka alt plug. Ill check for fuel and temp. Didnt bother to check. Thanx in advance

Ok so im about to pull my hair out. Im doing a ka swap on a 71 auto 510. It was running great and all of the sudden it stopped charging. I also noticed the oil and charge light stoped working. Swapped to a known good ign switch. No change. All fuses on fuse box are good. Headlights and wipers are still functioning as they should. Any ideas? (Dohc ka, can/am box)

I have a complete 78 b210 rolling shell that im willing to part out or sell as is. Only things missing are engine, trans, booster, seat belts and steering box.

Looking for 70/73 510 ash trey, cigarette lighter, ignition switch ( not actual switch, the tumbler and mount with key if possible) solex locks? Or a good complete set of locks (would be nice if it matched the ignition) dome light assembly thats not brittle and falling appart like mine, hella e codes, ka24e parts, fuse cover, front sump sway bar, adjustable tc rods, bump steer spacers, turbo stuff, nice set of bucket seats, nardi wood grain with hub, hope to see y all there

Hey quick question. My middle fuse on the can/am box keeps blowing. One of my wires is shorting. Question is, wich wire would cause the middle fuse to blow? I dont want to tear my whole harness appart. Thanx in advance.

Still for sale. comes with 3 distributors, stock ecu and cut harness. brand new oem nissan full gasket set. also comes with a complete megasquirt standalone setup and all the custom stuff done to make it fit into a 510. look at build thread for info. willing to trade for datsun parts of equal value (jdm grille, fender mirrors, suspension or brake upgrades) engines (nissan, toyota ls1? etc), wheels (ssr starsharks, mk2, mk3, formula mesh, reverse mesh, watanabe, hayashi street etc). even ae86 and s14 parts. text is preferred. i dont have internet anymore. hah. (818)255-8574 link to build thread http://community.ratsun.net/topic/37711-71-510-fj20-build/

Thank sealik. Yeah the hard parts to get it going in a 510 are all there. The only major thing missing is a tranny but a ka tranny works just fine. I also have a bell housing so you can use your l series tranny. Megasquirt standalone included. Im located on Los angeles

As title states, my fj is for sale. Custom motor mounts, custom rear sump oil pan, custom headers. It will bolt up to a 510 without modifying anything. Look for my build thread on project datto for pix. $1500 cash takes it. Thats how much I spent just on the fab work done to it. Pm, call/text me at 818 2558574

Im willing to pay for shipping if I get a deal on the driveshaft

As stated previously, im located in the San Fernando valley.

Stock length is ok. It's going in a 72 4 door ka24e swap but I can get it cut to length. Its the only thing left to get my dime on the road. Help a fellow ratsuner out!!! Thanx for looking

I'm looking for a drive shaft if your willing to part with that

Dont forget that you can also screw with caster if you wanted to.

Yeah I need one too. Cash in hand!!!

Interested in a trade?