Obscene620

How much for the 78 x cab and is there any possibility to arrange some sort of shipping?

These parts are peices I can get from one of my suppliers, I was taking the listing directly from their price sheet. I have a ton of stuff from them and have been to their facility outside chicago. I went to that site and there is somthing fishy about this. But the company I go through does make these peices, and I have delt with there stuff they make and they are very top quality parts. They will also make any part out of glass for you as long as you have a straight steel part for them to mold from. As far as me being a scammer, not quite.. I would have posted some shit like that on ebay or somthing not on a site full of ppl who im here to ask Q's because I know very little if any at all about these vehicles. I happened to find out and get the price sheet from them when I asked them to make a one peice glass front end using my good steel one, and was told they already make glass parts for them. Hopefully this clears me of any wrong doing but to satisfy my own curiousity I am going to order a hood from unlimited and compare them. If there is any major differances, hell even if not I will post pix and description on my findings. And as the pic goes I got that emailed to me from my supplier but it is as I see the same pic as unlimiteds site. Rest assured some digging is in order on my end monday.:mad: I dun like gettin screwed and I hope they're not because Ive done several thousand $ worth of biz in the past with this current supplier.

I plan on prolly using a narrowed gm 12 bolt from moser engineering, I have mickey thompson HR-1 wheels backs are 18"x14.5" fronts are 18"x6". I am tubbing,caging,narrowing,ect on this project. I wiil post pixs of what I cut out so far but this is very early in the fabbing. You also have to know that this truck has already been bodydropped 6"s by the previous owner, so the floor pans and firewall are all already custom made, basically this truck is close to just a shell of a 620 and will end up being that when its done. Im waiting on all the tubing to start the new chassis and cage, because of how fast this truck should be it has to pass an NHRA 25-2 inspection. This will end up being a ground up build with the shell of the 620 mated over the top.

Sorry but that on the posting Im new to this forum stuff so if im f*&^in do stuff wrong just lemme know so I dun keep doin it LOL

Got the motor set in and ready for some motor mounts to be fabbed, had to trim out the firewall some more but just at the top to set the motor in under the cowl panel. The motor sits perfect, as far as the truck still lays out with 3/4" of clearance from ground to the oil pan and the cowl hood is enough to cover the inch or so of the throttle body that sticks up over the fender, I also still have 4 inches from the front edge of the compressor housing to the core support. AND LOOK I MANAGED TO SAVE THE HIGH BEAMS LOL:rolleyes:

Very perseptive..... and yes it is right hand drive

I am now selling custom made Bolt on 73-79 620 fiberglass cowl hoods. these hoods bolt right to stock hinges and fit with very little work (no more than glass hoods for any thing) These are one of a kind there are no other aftermarket 620 hoods that i know of out there.. I have other datsun glass parts too I will list all of them below with pricing. 1969-72 & 73-79 Datsun Truck (all prices are in usd and do not include shipping) the hoods are all bolt on with steel inserts to attach to factory hinges. 69-72 STOCK FLAT HOOD (520) $475.00 73-79 DATSUN TRUCK COWL IND. HOOD 3-1/2" $485.00 69-72 HOOD WITH SC103 RAM AIR SCOOP $485.00 73-79 STOCK FLAT HOOD $485.00 69-72 FRONT FENDERS $350.00 each 69-72 LOWER FRONT GRAVEL PAN $290.00 I will be updating the parts list as we make them. If anyone is interested please email me at obscenehp@yahoo.com

I am now selling custom made Bolt on 73-79 620 fiberglass cowl hoods. these hoods bolt right to stock hinges and fit with very little work (no more than glass hoods for any thing) These are one of a kind there are no other aftermarket 620 hoods that i know of out there.. I have other datsun glass parts too I will list all of them below with pricing. 1969-72 & 73-79 Datsun Truck (all prices are in usd and do not include shipping) the hoods are all bolt on with steel inserts to attach to factory hinges. 69-72 STOCK FLAT HOOD (520) $475.00 73-79 DATSUN TRUCK COWL IND. HOOD 3-1/2" $485.00 69-72 HOOD WITH SC103 RAM AIR SCOOP $485.00 73-79 STOCK FLAT HOOD $485.00 69-72 FRONT FENDERS $350.00 each 69-72 LOWER FRONT GRAVEL PAN $290.00 I will be updating the parts list as we make them. If anyone is interested please email me at obscenehp@yahoo.com

396 ci small block chevy is a 4.035" bore with a 3.875" stroke= nasty amounts of low end torque. As far as the turbo setup those headers where made for a s-10 project, that pic is just the motor we're using for fitting and fabing everything, were working on doing what we can to fit it all under the hood but its possible we'll have to remote mount them. there is more room under the hood of this one than youd think we have pushed th firewall back about 8 inches and were in the middle of streching the cab 4 inches. Ive put more into less so it'll work out. As long as Ive got .035 wire left Ill make it happen. LOL

Yes the bed is completely molded and smoothed, shaved,filled,flared ect. I have pix of 99% of the work so far keep watching Ill get them all up as soon as I upload them to photobucket..

Im thinking its gonna be ummmm a handful to say the least.. LMAO I put a similar procharged motor in a 95 camaro z28 and it is insane for street driving.

I have some pixs of the floor pans and fire wall which is all custom made but no actual interior yet thats a bridge I have yet to cross. LOL

Sorry for the rediculously large company logo HAHAAH I didnt notice the image was that large.... lol

http://i88.photobucket.com/albums/k199/bad_03_lightning/OHPLOGO.jpg This truck is a current project at Obscene Horsepower Technologies inc. in Wheatfield , IN. USA. Scheduled to be finished by Hot Rod power tour 09' just found this site and since we all know finding parts for these is difficult :blink: so hopefully you guys can help in me finishing this project on time and presenting this community and the mini truck world with what I hope will be the sickest 620 ever built!! I will post as many pix as possible when I get them uploaded and will be more than willing to answer all the Q's I can.

Hey guys I am the new owner of this I guess some what iconic??... 79 datsun bulletside. Owned by a friend of mine (Dale owner of Ginuwine Stylz custom mii truck shop) who spent 6 years to get it to this point, he is still involved but has handed the keys over to me. We are already well on our way to having one of my companies (Obscene Horsepower Technologies incmotors (twin 56mm turbo 396 ci stroker LT-1) we have done the work to the firewall floor pans, trans tunnel, frame and ect. motor has been mocked in and we're ready to start the mock up of the turbo placement and piping. I will post some more pix as soon as i get them all uploaded to photobucket. http://i88.photobucket.com/albums/k199/bad_03_lightning/OHPLOGO.jpg