mr 202

Ok so im in a similar situation I blew a head gasket so I had my buddy that builds my race car motors go over my head port and polish and I put a comp cam and I got a timing set and so my delima is getting off my front cover do I need to pull my distributer? I have all the bolts out and it acts like it wants to come off but I dont want to break anything

and is there anything i can do about gearing my rearend its stock 78 620 the gearing is terrible that it has now like only doing 65 when it says its doing 80 lol

i love how clean it is! i vote motor first if youre gunna do it! but dont listen to me lol i bagged my first one then the motor blew up and i got discouraged and took it apart lol

hey thanks guys sorry it took a couple days, but my motor is out of an 82 truck and my head bolts are not marked and when i got the head off i found that the head gasket blew between 3 & 4 so im gunna get a timing set and gasket kit and make sure the heads good and i bought a cam and header to throw at it put the header on a while back but never put the cam in yet, the thing already ran reeealy good idk on hp but it had good power all the way through and sounds nasty with just weber header and 2.25 to a 2 chamber flowmaster with no tail pipe stopped right infront of the axle cant wait to see how she runs once the cams in, otherwise if you guys know of anything else i should do without going into the lower end while i have it apart any input would be verry much appreciated!!

Ok cool thanks I just went out and looked and theres nothing but a few random letters on the top edge where the valve cover sits againsed it

Im tearing into my motor and was wondering if anyone knows if there's a difference between the t83 wich is whats on my motor and the 07w?

its a comp 260s. its their bigger high energy cam. i looked around and searched through here and i didnt see ayone else who offered one for my motor, im sure ill be happy lol

hello i just got my cam and header for my z22 weber has already been on it and just rebuilt it the other day, it runs great already just lookin forward to the power and sound ill gain with th new additions. if anyone has ran this setup on a z22 and have any tips(ie.. jetting, timing ect..) please let me know i am verry open to input.

Hello do you make the stickers? Or order them? I have a 48 inch vinyl cutter and printer. I do vehicle wraps and all of the cool crap that goes hand in hand with all of that like signs and banners and just about anything that you could put a logo on. But I live in nor-cal. Just wondering and or offering my services to you or whoever wants or needs anything.

I am brand new to foruming lol. I never knew that using a forum could be so much help you guys are awesome thanks for the help and thanks for sharing your knowledge it's hard to come by these days.

Sweet thanks for the help I'll hook it up then and see how it effects it.

ok so if i wanted to hook it up to see if it changes anything, would i hook up a vacuum line, and it looks like a wire of some sort needs to be hooked up to the male connector that is off the side of the unit it looks to me like it may just be a ground but im asking because i dont actually know. lol

Hello i was wondering if anyone on here has the answer im lookin for, i have a 620 that i previously owned and got back but i got it back with a z22 in it and it has a weber 32/36 and im putting a pacesetter header on it this weekend, and it runs great and has good power but it doesnt have the vacuum advance hooked up that is on the distributor, and was wondering wether or not it helps or hurts the motor/ power, any input would help at this point because i cant find anything about it Thanks