FATSUN

Hi all, any info or links for this conversion would be great :confused:

Hi there I will be interested in the FJ20E intake manifold plenum (cut off runners and flange for custom intake manifold) free, just pay shipping please reply regards Paul im in the uk

bilbos ive new tyres now 175x50x13 still not low enough

on the 1200 site someone quoted: (You CAN use the early [front distributor] head on the later cylinder block as the oil feed to the rockers is pumped directly up the correct head bolt hole in the cylinder head. You can NOT use the later head on the early block because the early block feeds the rocker oil to a small vertical drilling at the side of the cylinder head gasket face. The cylinder head needs a corresponding drilling that feeds the oil across to the same cylinder head bolt hole as the later engines. Since the newer heads do not have the drillings necessary to pick up the early engines oil feed, the rockers will not get any oil at all with predictable results.) Ive since checked oil feeds head seems the same , time will tell

yes a great site , information over load

Indeed lots of room do you think the bike carbs or webers on the A15 ???

Ive got to get a new inlet made the other set up cost me £750 thats R1 carbs ,bespoke manifold ,fuel pump and pipercross air filter . Not sure if i should fit webers ive got the carbs just need to source oval manifold ....you just cannot get in the uk Anyone over there got one for sale???

thats good news heres a pic of the carb Sweeeeeeeeeeeeeeeeeeeeeeeeeeeeet what do you think???

Hi can anyone tell me if the a12 head is a straight bolt on fitment to an a15 block .. I know its not as good as the oval port but have bike carbs on the 1200 engine & janspeed exhaust , so just as a try out why i get new headers/ inlet constructed i want to really run the engine. thanks in advance

this is how it looks now

my B110 ">

Hi I have one in the uk [/img] not sure if it will load..... In process of evolution

Hi, great work count me in for a set , im in uk so let me know when or even a set of drawings /parts needed to complete ...&price many thanks Paul

[/img]