That is where ratsun comes into play. You have to figure out how you want it to be done. You dont have to be a fabricater to figure how to redo bolts.
:eek:
Do the breaker bar. The inlets are pretty sturdy going into the head. I was referring to stripping the part with a wrench. ( the reason for 6 pt socket ). They are real tough to get off. I used a 1/2 drive socket & breaker bar and still had to "put my weight into it". Good luck
Fisch, make sure you use a 6 pt socket and a long breaker bar to get it off. be careful not to twist or you cound end up breaking it off at the head. your best bet would be to buy one new from e-bay or something. some things you just have to buy new.:eek:
I have one for you. pm me or e-mail at Thiscard4u@aol.com. You can use a latch from either side, Just turn it over. I would post a pict but for some reason photobucket would not let me log in. I will try later.