hooliganPL620

thatd be dope hit me up with some prices

i would like to have that im building a 10.5:1 sss clone would bw nice if my baby could breathe a lil better zip code is 93442

still have all the stuff ive been busy with work and building a motor at this point guys just tell me you want it and send me an address and ill send you my paypal. the manifold is a bit rusty and its only the upper i need the 2 to 1 bottom for my truck

i have k&n's just like those

thank hang i ordered them from nissan this morning have to buy the longs in packs of 10 and the shorts come individually so with my account think im paying 62 bucks for a set plus 6

i will take a picture of the threads for you the head bolts are not usable on 4 of them....habbit tells me

anybody got a set of headbolts? cleaned mine up today and they looked a little sketch (a few pitted and wavy on the threads) and no one makes the head bolts wtf so arp offered to make me some but id ratherjust have a good factory set....called nissan those guys are fucking stupid around here

bought a factory replacement made in japan for my l16 from my local parts house was clearly marked datsun l16 bluebird etc etc cost me 45.00

key west ? what block you on i grew up out there

hey mike you have facebook im tired of trying to figure out how to post pictures

you have other issues if your only keeping up with traffic my honda only has 72 hp and it keeps up with traffic at 5000 rpm and it has a blown head gasket:blink:

whats the lift on the cam sheet radim?

no bump home slice recheck the master make sure the seals are still good....brake fluid mixes with moisture makes acid.....acid bad acid eat seals

hey ive got a l20b cam ill put that can in for trade your new cam :P have some faith its an easy job all you need is 3 or 4 wrenches a torque wrennch a block of wood cut at a 45 degree feeler gauges and make sure the added lift isnt gonna knock the valves into the block. how are the valve guides and seats in the head? recent rebuild?

ill throw in my rusty datto