Jump to content

a1machinista1

Members
  • Posts

    61
  • Joined

  • Last visited

  • Days Won

    2

a1machinista1 last won the day on February 22 2012

a1machinista1 had the most liked content!

Profile Information

  • Gender
    Male
  • Location
    Portland Oregon

a1machinista1's Achievements

Newbie

Newbie (1/14)

3

Reputation

  1. I ran into a set of badger 1.00mm over sr20 pistons I had on the shelf. So $48 plus shipping.
  2. I have stock japanese valves if your interested.
  3. I have a complete longblock. It was pulled out of a driving car that my boss turned into a track car.
  4. I have one I will ship from oregon. Im going to guess shipping will be about $150 I will sell you the engine for $400.
  5. I'll send you a surfaced, balanced flywheel for $75 plus shipping. $12 usps
  6. I'll do a comp test on it, if it turns out ok maybe do a recon on the head, new head gasket and see what I can get for it????
  7. I had an A14 crank I lightened, balanced and ground awhile back and put on ebay. iirc I got about 350 for it. Maybe parting out is the way to go....
  8. How much meat in the runners? Good candidate for a porting job? any radius to work with under the exhaust seats?
  9. Ok profile updated. Price??? Well that really depends on what someone wants... Trades!!.... NO trades. I have no idea what a fair price is for a running A14 long block, But if I have to list a price according to the rules then, $1,000.000 BUT I will take a hell of alot less if you have cash..................Only head #s are 455 and 990. I would assume this is a basic A14 nothing special long block
  10. I was just givin what I was told is a good running A14. Anyone need any parts?? Or anyone looking for a complete A14 (minus carb)..... I'll be doing something with it, just let me know if you have any interest. I will tear it down if I have enough people interested in parts.
  11. I believe I have 2 or 3 of those set ups in the back of my shop.
  12. DATZEN MIKE special I have a Datsun A12 crankshaft.. This has a fresh grind of .010 on the rods and .020 on the mains. It has been lightened (knife edged) and "0" balanced on our Sunnen DCB-2000. The DATZEN MIKE price is $125 plus shipping.......I listed this deal awhile back and had no takers SO this time I will sweeten the pot. I will throw in a set of main and rod bearings. Mains are Daido (Japanese) rods are Repco... I will also throw in a set of durabond cam bearings and a new head gasket....................Its late and im going home if I have any interested parties I will post pictures in the morning.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.