Jump to content

marky510

Members
  • Posts

    30
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling
  • Location
    Santa Barbara, CA
  • Cars
    1963 Datsun 312 Wagon
  • Occupation
    Shop owner/Mechanic

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

marky510's Achievements

Rookie

Rookie (2/14)

  • Dedicated Rare
  • First Post Rare
  • Collaborator Rare
  • Conversation Starter Rare
  • Week One Done

Recent Badges

24

Reputation

  1. NPR, what was the final concensus on George Moses? Did you get anything from him?
  2. Time Left: 2 days and 16 hours

    • WANTED
    • NEW

    Had a major mishap at powder coaters, the sandblaster was a newbie apparently and they dropped it off the roof (or so it looks like). Looking for a non-cancerous, straight dash assembly (bare is ok). I have a 312 wagon, 320 truck should work as well, and maybe a 310? What's out there? Let me know what you want for it.

    NO VALUE SPECIFIED

    Santa Barbara, California - US

  3. Hey guys and gals, Not sure if anyone has a source for the 521 glovebox, but on ebay there is a company that is doing several other models but not the 521. Just got one for my 312 and it's pretty nice and sturdy. If someone has a half decent one that they would be willing to send in to have a template made, they would be able offer these up. Ebay id is musclemaniac5. Directo contact is Mike, mw74cuda@netzero.com Check out there store for what they are making. And, I am in no way affiliated with them and make no profit either. Just hoping to get a glove box for my 521. Mark
  4. Anyone have a line on the glovebox rubber bumpers for a 312 or 320? I believe they should be the same. Mark
  5. Thanks Mike, I was thinking that was the issue. And my front brakes on the 312 were inspired from all your work that you've been posting over the years. Thank you for all your hard work.
  6. anyone know how to get rid of the photobucket overlay?
  7. As requested... Just did rear lowering blocks, still need to go down a little more but waiting until mostly assembled. I will be doing a build thread on this so watch for it. The day I picked it up The day it was delivered to me I don't have too many pics of this, but pretty much current state of rust repair Getting ready to go to Historics last August for the Nissan event. My old 521 behind it. Sold this late last year. The buyer finished it up and it just sold on BaT.
  8. Need to get them off my phone, will post some later after work.
  9. Thanks for all the info. Found the 521 cylinders and Rockauto, hopefully they actually have them, but watching the ebay ones just in case Rockauto falls thru. The rear brake hose I'm going to try and retro the 521 hose to a clip style... Lemme see if I have some pics... I know y'all love pics
  10. Hey guys, looking for a source for rear wheel cylinders for my L320. Brake hose source would be good too without going braided. Thanks for help. Mark
  11. Hey Jeff, Awesome build so far. Can't wait to see it drive. One thing I noticed is you didn't verify bearing clearances on your rods like you did on your mains.
  12. I just looked at my SSS Coupe glove box in storage and it is the checkered flag. https://photos.app.goo.gl/ZkMDcGtpPdQuHaTa8
  13. I've used these in the past with good results: This for lower part of door below window frame https://www.amazon.com/3M-03612-Adhesive-Eraser-Wheel/dp/B005RNGN8I And this I've used in the window channels with a very stiff toothbrush or a nylon brush around the same size. It won't touch the dried rubber of the old seal but it will soften the adhesive https://www.amazon.com/3M-General-Purpose-Adhesive-Cleaner/dp/B00Y957GWC/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1518885860&sr=1-2-catcorr&keywords=051135-08984 Hope this helps
  14. Hogie, Cool to see another one. I'm in the middle of getting mine back together enough to drive. The roadster suspension is the same front and rear, except front anti-roll bar and front springs. On brake upgrades, if you're able to get the front spindles off a Roadster, then all those options open up to you. I opted to put a Roadster rear axle assembly that gives me the 9" rear drums. Or you can do just the backing plates and drums. Hope this helps. Mark PS, I'm missing a front grill as well....if you happen to find 2?
  15. Alrighty ... Thanks so much checking all of that. I'll check thru my myriad of boxes that my helper filled up with 312 pieces, hopefully there is a pigtail harness that I need. Thanks again and I'll keep you posted of the results. Mark
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.