primo74620

I was wondering if the Tach off a 77' 810 would possibly fit a 74' 620 ??

Well, I hope it doesn't rain. I have been trying to make it there for the past few months. I finally will be able to attend and it might RAIN!!!!!!!!!!

I had the truck running good. Today I drove it around for about 10 min. and it started turning off. I had to keep my foot on the accelorator to keep it running. It has a hitachi carb. Any ideas?????

Do you mean to splice it in with the idle cut solenoid wire?

It is the choke relay!!!!!

I was trouble shooting the wires that run from the stock carb on my 74' 620 and found that the heater relay is no good. I have searched all over for a relay and can not find one. Can any one give me leads (I have searched Rockauto, Napa, and other stores) Or is there a relay from another car I can use?

Well, I found 2 anti-diesling solenoids at the jy off some 210's for $3.00. I removed the solenoid from my carb and found out that it was missing the center pin. I finally fixed the spuddering the truck did as I turned the engine off!!!!!

I have a 74' 620 and I think the electric choke is not working properly. I know the choke has a bi-metal coil that heats up. Now does the choke plate's lever that goes into the choke housing have to be with in the hook of the bi-metal or on the outside, Also does the choke plate close with a spring and not with the help of the bi-metal when cold?

I have search on Rockauto.com, but can not find it!!!!!!!

I have a 74' 620 with the original Hitachi 340-12 carb and I need the anti-diesling solenoid.

My buddy had a Titan a couple of years ago. I saw him yesterday and asked if he still had them, he said "yeah" I then asked him to sell them to me and he said he would give them to me. I believe they are 6 lugs. Will the fit my 74' 620 with out any modifications. If so what size tire should I use?

Does anyone know where I can find a Idle cut off solenoid?????

Thanks, the carb looks like it was already rebuilt. I am just going to keep it till the Hitachi goes out or starts giving me trouble.

Found a Weber 32/34 for my 74 620 and I want to know how this would work on my truck???

I do not know off hand, but I will remove mine on Wed. and get back to you.