Anybody know were I might be able to find the rubber for a 70 510 4dr rear quarter glass(fixed small glass). Dats restore, steele rubber, new datsun parts, and socal dats dont seem to have them.
Start with standing the tranny on the bellhousing,I use 4 x 4 blocks shift tranny to neutral. Make sure to use sealant on the matting surfaces. Put the shifter and the selector in 5th gear There is a dowel that fits into a slot. Now you will have to hold the shifter so that it stays in 5th as you drop it down to the tail shaft, take note that you will have to drop it about 15 to 20 degrees of rotation counter clockwise and when it just about bottoms out turn it back to match the bolt pattern on the rest of the trans. Slap some bolts on till you hopefully run out of bolts and the rest is gravy.
Its a 78' , the motor is all stock, dogleg 5spd, Some a/c components are missing, as for the interior seats are nice, dash not so good, everything else really not so good.