jrozn

The legal papers say '93, I have no way of knowing if its older. I assume that the body didn't change much design wise. I was looking at the carb yesterday and I believe the filter that was installed is not getting a correct seal. (I am never going back to that trashy shop, jesus christ). I believe that my carb is dirty and needs some cleaning. The engine was working well and it packs a punch. Thank you!! LHD B120 or Datsun 1200 (how they call it here) are a pretty darn common truck in the Dominican Republic. We have spent the last 5 months doing a whole body/paint job removing the rust and bringing it back to its former glory. more pictures of the truck Yeah, sort of. I'll talk to the guy to see if he can correct the issue. I don't think it should be a difficult repair.

Hello guys! This is my first post on my fathers 93' Nissan 1200 Pickup. Years ago the engine was swapped with a bigger one that has a lot more power. (Originally it had a a12, now it has a a14 with the a12 transmission). Recently, the engine is having an issue where it starts and immediately (if you release the gas pedal) it won't idle and it will shut down. This was happening before, the shop took the carb apart and cleaned it. The problem was corrected until a few weeks later it just started doing it again. I think I should buy a new carb, all carbs I can find locally are used. I have a few pictures of the engine and the carb: https://imgur.com/a/enrpK Can I use this carb that I found on ebay/amazon: https://www.amazon.com/maXpeedingrods-Carburetor-Nissan-Datsun-16010-H1602/dp/B06VT44V7W/ref=sr_1_1?ie=UTF8&qid=1515850470&sr=8-1&keywords=nissan+a12+carburetor If not, what do you guys recommend? Thanks!!