Jump to content

Recon_slider

New Members
  • Posts

    6
  • Joined

  • Last visited

About Recon_slider

  • Birthday 01/28/1988

Profile Information

  • Gender
    Male
  • Location
    Tucson AZ
  • Cars
    Datsun521
  • Interests
    autosports,drifting,auto cross,racing,rally cross,ect
  • Occupation
    Army vet

Recon_slider's Achievements

Newbie

Newbie (1/14)

6

Reputation

  1. Wait soo are the 720 drop spindles able to be bolted on a 521 with no problem's?
  2. wish i could make it with my 521 from Tucson but not this year
  3. Never heard of it ill have to look it up but when is it?
  4. thank's for all the good info thus far will be taking off the carb to rebuild 1st. will check the timing next and i took off the valve cover to get a look. Also the L20 i got came out of a truck and i don't know how to post pic's yet. will be buliding up the L20 on the side and trying to get the stock L16 to work well and daily it i will also be uploading vids on youtube. i have alot going on with my life as far as automotive stuff goes. doing a 4.8LS swap in my 96 s14 and working on my bagged crown vic and a few other projects. will keep you all posted.
  5. Ok so long story short i got the stock motor running good on all 4 cyl with a fresh tune up. So who ever rebuilt the carb on this thing messed up real bad as the gas was flooding the motor out and i have been trying to adj it to cut back on the gas and get more air so any ways i went to start it up and it whuld not start right up as it did before i checked the plugs and oil and smelled gas so i hope the gas didn't take out the rings but it for sure got in the oil and the spark plugs are all gunked up and it wasn't firing on al 4 so im new to the l series game and don't have any info on it and need to be pointed on the right path i also found and purched a l20 out of a 620 truck for rebuild and possible swap if needed and wondering what all will be needed to make that work after i rebuild it also where can i get good rebuild kits for them . also will a webber from a vw bug work with the motors? thanks in advance. pls don't laugh too hard any help will be great
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.