Roge

The top image is the old Fulcrum and has an inner seal the second picture you can see both the new and the old one together and the new one doesn't have that inner seal... is that gonna matter or not???

Thank you... :)

I was wondering if the front and rear drums on the 521 are the same because I need to get new ones but I want good reputable ones like Raybestos but on rockauto they only have them for the rears and not the fronts. If you guys know of any other brands that are as good or better please let me know and if there are other websites I can get them from. Thanks!!!

Thanks for the info

We're the centric parts you used good and did they hold up well?

that's what i want to do i want the truck to become my daily driver and a nice one I'm not worried to much about the body right now that's way down the road i want it to run and run well and it to drive straight and be able to stop we didn't have much time today (me and my dad) to fiddle with the brakes to much but we were going to try and take the brakes apart and see if we need to replace them all the way around or not and what should i do to replace the floors cause like you said i don't want it to rattle either haha.

yea i know its just what we had on hand

more of the underneath of the truck got it stored and on jack stands ready to work on over the winter also we need new bushings pretty much all the way around like upper and lower control arm bushings inner and outer, stabilizing link bushings, sway bar bushings, king pin bushings, body mount bushings and it needs new brake lines cause there all cracked so do you guys have any suggestion on where to get most of these bushing??? and preferably polyurethane or something stronger.

https://www.rockauto.com/en/catalog/nissan,1970,521+pickup,1.6l+l4,1212310,transmission-manual,clutch+master+cylinder,1996 And yes I also meant brake one because my brake resivior was open when I got it so who knows how long it's been exposed to the element so I'm just gonna get a new one and what brands of parts do you guys prefer? Like centric or others like that?

Hey guys what parts on a Datsun 620 can fit on my Datsun 521? Like radiator? Clutch master cylinder? Ext.

I honesty don't thing the gram will be that trusted just a bit of surface rust what I think it is is that it rusted through and ate at the floor stiffeners like Wayno said so I'm hoping it didn't get much at the frame I haven't worked much on the truck but take the starter off I have been setting up and area to store it over the winter so it doesn't stay outside and so I can work on it over the winter.

Hey guys a question what kind of ignition switch will work with my truck cause there is no key so I need a new one

What would the best way be to replace the floor and floor stiffners???

ok and ill try and get pics for you sorry about that :P