pickleweasle

Where is clemson in comparison to Charlotte time wise.

Oh and I've tried searching it and apparently I'm not searching the right thing but how do I post pictures?

Yea but for shipping purposes mostly all i really need is the part with the holes that the lower part of the grill sits in. That is if your willing to cut or drill it off of the radiator support. I live in concord NC so yea shipping will deff suck.

Awesome yea I'll post a pic as soon as i get one and figure out how. But its the panel spot welded to the support runs cross ways between the fenders mostly hidden by the bumper. which BTW I would be interested in the bumper as well if you have a good one. Thanks!

I'm looking for a header panel or radiator support for my 79 620. Mine is pretty much trash.

I got an automatic trans from my 79 620 I just did a 5 speed swap so I have everything minus the automatic wiring harness. The trans ran good but did slip a little going from first to second. The pedal assembaly shifter flexplate and converter is included. I'd like to get 300 for it all. I can't give mileage because the speedometer is broke and spins in circles so i'm not going to try and guess it. I will ship if needed. 704-701-3038 Ask for Richard Thanks!

Ok its an intake for an l20 this one is a non emmisions intake as where mine is emissions the two bungs where you bolt the throttle cable bracket are toward the front of the new intake and the old one there closer toward the firewall minus that the flanges look the same for the head and the carb the ebay ad only said it was a l20 intake that he didn't know what it came off of.

Ok so I just bought an intake manifold off e-bay everything looks the same minus were the throttle cable bracket bolts is on the oppisite side of the carb. Why is this and what could it have come off of?

Also what fluid does that tranny take I haven't been able to find anyone who could tell me for sure

Awesome thanks guys I thought that was right but I wanted to make sure before I got it togeather.

I'm doing a 5 speed conversion in my 620 when I toke the flex plate off there was a plate on the back of the crank does it stay or go when I put the flywheel on I'm assuming I leave it off cause the pilot bushing doesn't fit.

I need the clutch and brake pedal ass. out of the 620 that is if its not an auto.

Whats up guys! So I have a 79 620 auto trans and i'm wanting to swap it to a 5 speed i have a 5 speed trans from a nissan I think it was an 83 with a z engine I am sure that its a Z engine I've heard that the trans will work if you swap the bell housing but i have never heard if you can use the flywheel and clutch or If you have to use the L series parts and also is the shifter location and driveshaft the same. Thanks!

AWESOME thanks man thats everything I needed to know. I was just looking for a more common vehicle to get the tranny from and that helped alot. I will prob go with the 225 mm clutch setup cause I don't plan on building the engine alot at all so that should be fine. Thanks again for all the info!

Whats up guys! Sorry im sure theres tons of post about this but I havent found any that are straight forward. I have a 79 620 king cab with an auto tranny that i want to swap to a 5 speed. From what all i've read a 280z tranny will work but im not 100% on that and i dont want to drop the cash on it and run into problems. If someone can tell me what cars/trucks I can get a tranny from year, model, and any other usefull info that would be awesome. I also need to know what flywheel I can use. Also too what mods need to be made to the body to make the swap work I assume that there are provisions for the clutch master cylinder and all i'll need to do is cut out for the shifter.