Jump to content


Speedymaru

Member Since 11 Jul 2017
Offline Last Active Apr 16 2018 08:34 PM
-----

Posts I've Made

In Topic: Headlights won’t turn on

15 April 2018 - 05:45 PM

Replaced the switch and put it all back together and they’re working again! Thanks again

In Topic: Headlights won’t turn on

15 April 2018 - 04:21 PM

Put a new fuse in as a old one may look good in the galss but the ends are broke inside

If it worked before then its just a connection issue most likely. Even if a hack wire job.


I just took the switch out and This is the problem. The fuse that’s on the switch itself looks good, but is actually broken. I’m heading in to grab a new one and will check back when done! Thank you all

In Topic: Weber running too lean, can’t adjust enough?

12 April 2018 - 06:47 PM

Got the part today, and just finished installing it. I’ll run it for a little and make sure the leak is gone.

Now I just need to buy the jets for the carb and hopefully I’ll be good to go

In Topic: Weber running too lean, can’t adjust enough?

12 April 2018 - 10:14 AM

Okay, so this is the part I need? https://m.autozone.c..._8537?location=

I don’t think there’s anything majorly wrong with the motor. The oil is definitely coming from the sending unit.

In Topic: Weber running too lean, can’t adjust enough?

11 April 2018 - 08:11 PM

Alright sounds good. Thank you very much.

I’ve lost about half a quart in a couple days. And that’s driving it ~30 miles a day. I called autozone and that part that I showed the link for should arrive tomorrow morning. Not sure how to check if it’s BPTS or NPT though. It says it’s a Datsun specific part, but we all know how reliable parts stores are.