Jump to content


Member Since 01 Nov 2007
Offline Last Active Today, 12:33 PM

Topics I've Started

87mm long rod L18 engine any body ?

10 January 2018 - 11:50 AM

Hey out there I am about to bore an L18 to 87mm Z22 pistons and L16 long rods been wanting to do this 2mm is a lot ,the machinist is concerned Nissan comp book said you can go 3mm ouch.

Red neck fuel injector removal tool

09 January 2018 - 09:56 AM

Broken quite a few unjectors -so we built these from old Chevy wire hose clamp pliars , remove tips and tig or welded some self drill screws and cut off tips . Some brake cleaner and these make SR injectors easy to remove . I know my camera sucks. Please respond if helps.FgsfIkQ.jpgMnpUGud.jpg

1974 620 with sr20de S15 Na swap

24 December 2017 - 09:42 AM

Date is not right !Thought I would post a couple pics here but Datsun 620 SR20de swap will be in off topics Alleycat Garage I will go back and try and catch up truck is almost done .trying to get pics thing ,working.I am making removable raised tunnel PHYCCqo.jpgDACQdyw.jpgb3s8tbY.jpgMVLHZ2T.jpg

Speedway racing in So Cal 7-19-17 on livestream for race fans .

19 July 2017 - 10:58 AM

Tonite is ugly Hawaiian shirt night ! Maybe you can livestream .

620 521 Sway bars, install - available again !

08 June 2017 - 10:50 AM

Wanted to put this out there Futofab got them built again I am told through Dave .(I remember my cust buying on ebay turn six years back they were rare ), my customer scooped up a set and I installed on the nice 1974 620 with wilwoods (we did not paint orange they came that color ).Rear was a little work .You need truck at ride height with axle on stands or ramps need to drill frame and install U bolts thru frame pretty easy then adjust on axle to clear shocks exhaust and had to release brake line at top of diff clamp when jacked up would hit there. Front is a one inch bar went on easy had to wallow holes a little bit towards inside on bushing brackets .
Also has poly upper a arm bushings from Blue Hands .
I usually post my shop work in off topics , at this time doing a 521 sr20de swap, will get back on after 1984 Mitsu 4x4/Dodge ram gets done for my son up north Tahoe.IMAG0029_1.jpg[url=http://s1183.photobucket.com/user/Alleycatgarage/media/IMAG0040_1.jpg.html]IMAG0040_1.jpg[url=http://s1183.photobucket.com/user/Alleycatgarage/media/IMAG0042.jpg.html]IMAG0042.jpg