-
Posts
10 -
Joined
-
Last visited
Profile Information
-
Gender
Male
-
Location
Minnesota
-
Cars
76' 280z, 86' BII Bronco, 02' Ranger Prerunner
-
Interests
cars and garage tinkering
MN280z's Achievements
Newbie (1/14)
11
Reputation
-
no problem! yeah it's at least brought back all the old pics for me in super useful how-to's etc. I'm trying to get all my pics converted over to imgur but for now this seems to work great for me.
-
works fine for me using chrome and the Fix in the link i posted at the top of my first post. If you don't have it already its a great fix because it brings back all the pics from old posts/how to's that have totally fawked from them. until I have a bunch of free time to switch all my pics over to imgur, i just used it temporarily cause it works.
-
been a while, have a little to update. Didn't get after this thing like I wanted to yet, but I'm trying. It might take a little back burner position to my Ranger as I want to get it done for a trip this summer. That and I really want to throw the 280 on a rotisserie and do the rust repair right. I'll just dump a few pics of what I've done in the last few months. got my BC coils on, picked up some better condition front fenders, started messing with a little sheet metal repair, and I ended up getting a good deal on a triple carb setup so that will be going on later as well. picked up the 4 bolt style so needed to drill for that. Also am going to cut out for access to the camber bolts and cut a plate to cover and reinforce the area. some of the sheetmetal work. big plans for the floors and frame rails later, as I will be making my own. And just a few of how it sits right now. Planning on moving in the next year, so I may wait to really dig into till I'm in the new shop :) just wanted to get it a roller again for moving it around. engine and new to me triple carbs
-
not sure if this was posted or not yet. but this fix has worked for me so far in chrome. https://forums.redflagdeals.com/google-chrome-firefox-photobucket-hotlink-fix-2126190/ this whole thing has just destroyed forums
-
Was busy with work and a couple fishing trips to get much done lately. That and the wife's Monte Carlo needed some major engine repairs. Broke out the energy suspension bushing kit and started with the mustache bar. They were by far the worst in the car and it cause the usual clunk when shifting hard. Got the spare tire cut out to make room for the fuel cell. Started mocking up the rough height/area where it will be sitting so i can go get some !" square tube. All I have is round and some random box steel that is a little overkill. It got pretty cold again the other day, so i pushed the Z outside and tried that as a poor mans dry ice method on the sound deadening. Worked pretty well combined with a few hammer taps as I moved along. Got a better idea of what I'm up against with the floors. I will just be doing my own flat sheet floors and frame rails. I have the tools and metal, so why not save a little money. I'm not going for 100% resto anyways, Just clean and strong. I also plan on having the Fuel cell flush to the trunk floor so I can cover with some aluminum floor plates i'll make. The filler hose and vent line will have to show through but it is what it is. I plan on boxing in the cell outside with some dimple die'd aluminum panels. Or a combination of that and a custom aluminum diffuser to help hide it and just add more of the aggressive race look I want. Anyways enough babbling till I get more done! on to some pics :) nasty mustache bar to a little less nasty bar Removing the stock sound deadening. came out in some pretty decent chunks. my rust free floor rust and tar weight reduction stage 2 :) Fuel cell mock up. Not the greatest fuel cell in the world. but it will get the job done and get this car on the street. I have most of what i need using my parts from my truck fuel system. Just need to grab a few more -AN parts and should be good to go. Going to be waaay more fuel pump than I need right now.
-
Thanks! Im out growing it though hah. Yeah I was thinking that too. It's major rust problems come from sitting over dirt i think, which is too bad.
-
(for those that can't see PB pictures) - https://forums.redflagdeals.com/google-chrome-firefox-photobucket-hotlink-fix-2126190/?hotlinkfix=1517551477368 Picked up my first Datsun, always loved them. I saw myself more in a truck, but I do like what the Z's can be. I needed another project like a hole in the head but here we go! It needs a little body/floor work but not too bad. Picked up this 1976 280z that was a runner/driver. Plans are to have a little race inspired rat look too it. Or maybe a little old military throwback look. If it was a little more solid I kinda like the pitina it has on it for the roof,hood and hatch haha. So far I've just got it cleaned up a bit and started taking off crap I don't want. Removed all the EFI and related garbage off and going 4barrel. I just like the simple look and It'll run good with easy problem solving. plan on putting in a fuel cell where the spare is. The stock tank was dented to hell and pretty dirty(clogged up the pump and filter it had on it and started running like poop on me) Plus I hate how you can see the tanks on these cars. This will be a fun creative type build like most Rat builds, and will have some touches here and there of my typical off-road flare. IE tube, dimple dies, and maybe some more lights in a tasteful way. On to some pics! day I picked it up the clean-up process and removing unwanted parts seats are pretty good besides the bottoms, maybe I can get them re-done car came with new tires for the turbines so I threw those on right away as the old tires didn't hold air how it and the motor sits right now. Just waiting to get some parts in and get it back to running/driving. as you may be able to see it's a ATK replacement engine, so that happened at some point. runs good so hopefully not too many miles.
-
yeah was in IE..you're right the worst and didn't think about it. looks like it works now, I'll start a thread on the new project :)
-
nope, still wont let me paste anything in. or use the link/picture buttons. opens up I paste the link, hit ok and it does nothing. can't even exit the pop-up which is weird.
-
so I'm new to this forum, but not new to forums by any means. what is up with trying to post pictures here? It won't give me the option to paste in a copied link. And when I try to use the img button or link button it just sits there and does nothing and I have to hit back and it erases all of the post I just typed in. something I'm missing? or is the site just broken for me? should be as easy as copy link, put [/img] around it and done. but if I right click it wont give me a paste option and the little paste button does nothing either