tuckfoo

http://tinypic.com/r/wtwsi8/9here is what the back of the it looks like

I have a 510 that I'm makinging a new harness for and it's in the middle of becoming a track car and it has a alternator from a 620 how do I wire it thanks

thank you

ive been working on it i got a new petronix ignition for it and it didn't change any thing, thank you guys so much for helping ,would anyone have a ignition wiring diagram a lot of this wiring looks pretty ghetto rigged

it is petronix, yes it has been turned off

i am getting 12 volts to the hot side of the coil the coil wire is good i have changed the coil ballast resistor and tried a different ignition switch

All right so I did a oil change on the car and to prime the oil filter I pulled the coil wire off so it wouldn't start I put it back on and later tried to start the car and it would not start, sometimes when I let off it would backfire out of the backfire out of the carburetorand shootout White smoke now it'll turn over and it's not sparking when it's turning over but if I bump it right before the starter kicks it will spark

I have acquired a rusty 510 with a million parts for stupid cheep its got a L20b and a U67 head CURRENTLY this will prob change but it has a offy intake and a 32/36 webber on it but i found a bunch of SU carbs and a manifold to go with them but i hear tuning them is hard and the linkage is a pain i also cant find the linkage what should I do ? :confused: