Is the wilwood one metric? Phixius what master and pv did you use? Got a web site or part numbers I keep ordering the wrong parts! But that's cause I'm a goober! Thanks
When I got the truck the po had the beebani brackets and pathfinder brakes...I got in the deal so I've got the brackets rotors and calipers all mounted up but I've heard different opinions on master cylinder options is it possible to use the stock single master that's in the truck? Is a proportioning a must... will I be locking the rears without one? Any info or opinions or part numbers would be a great help thanks
hello its been awhile and im still in the same place with my engine tranny clutch collar! yulp big time slacker so say i have a l20b with a 6 bolt flywheel and a fs5w71b what clutch and collar would i need?? uhhh mike? thank you
i also have been using the z fork should i be using the truck fork from what i remember its a bit shorter... goin to canyon carve the moto then try n get to the bottom of this. thanks mike
heck yeah thanks mike the only thing is the one out of the 4 speed is shorter and i would think would equal less throw?? ill try it again.. and the clutch is new exeedy unit not the old 4 speed clutch...
so I've got a a lightened fly wheel hmm the the trans is a 76 z i think not sure if its a dogleg? new clutch supposed to be for the trans but i could have ordered the wrong one? the short collar is the truck collar which dosent work the long i got out of a friends z that im not sure which year and sorry bout the measuring tape im not up to speed with a mic an all that not sure mm but my problem is the fork is not actuating the clutch it starts to move but hits it right at the end of the window in the trans so i think ive got the wrong collar or wrong clutch??? any help would be awsome if not shes been in the garage for a few years i think she likes it there?? ahhhhhh hurrumph