Jump to content


johndias831

Member Since 19 Dec 2016
Offline Last Active Mar 27 2018 10:26 AM
-----

Posts I've Made

In Topic: 510 rear springs / roadster guys

07 March 2018 - 10:26 PM

Hey guy's I know this is an old thread but I'm doing the suspension on my 510 and I found that you can actually use 3rd gen 4 runner and tacoma FRONT springs in the REAR of you car. They have a 3 inch inner diameter a 5/8 coil diameter and they have an uncut spring rate of 590. They're long and will need to be cut down but that will land you with a significantly increased spring rate that will be anywhere from 675-875. Mine are 760 and roughly equates to 200 when divided by 3.8 (to factor in that the springs arent above the wheel center line. Give it a try those looking to make the rear stiff because these springs are plentiful and they fit well.


In Topic: Do I need bumpsteer spacers

13 September 2017 - 07:10 AM

Thank you guys very much this is really helpful