Jo Waldner

niceiLike the big mirrors and the white wallis!am not good in working with computers so i have my problems with posting photos etc! but i will work on it :)i ask my wife tomorrow

that sounds like real mechanics!! cant work further on dizzy at the moment cause my kids always ask for a drive with the currywurst! 620 single cab long bed in red! You know what a german currywurst is?

puhh in my oppinion a dizzy always has just one point !?

racerx sorry my english is not so good, what do you mean with u had bitchen time trying to adjust dual points???

guys, i needed to change my front wheel bearings first today! Also he got some new brake shoes installed. i love the little gear where you can fix the correct distance beetween drum and shoe..awesome user-friendly I hope i will have time for MY DISTRIBUTOR tomorrow. after read the words from distributor guy i believe i give it to the bosch service partner in town to overhaul the bushings and especially the vaccum control assembly,Braker plate assembly including Thrust washer and governor weight and springs!!!! But i need to make my experiences in installing the electronic ignition..if it doesnt work, shit on it! Install the contact set again and doing what you guys recommended me.

did my Timken wheel bearing installed today...no problem with adjusting so far!15 years ago i was learning at Audi/Volkswagen service station and we adjusted the wheel bearing clearence the way that the plain washer should go smoothly through the grease :thumbup: Awesome i love my Datsun !! Greets from germany

Hi G, ya thats exactly the swap iam going to realize in mine j15. my points are in NEW condition but the problem is my shaft with has too much radial play in housing. approx. 1millimeter. but the engine is still running!not as strong as few month before but this can have other probs i know :w00t: All in all i will start to make the electronic swap today. Greets

my electronic ignition set for four cylinder engines manufactured by HOT SPARK just arrived today. I will give you some pics later!! PS: Driving a Datsun in Germany is like going for a walk with a tiger :thumbup:

By the way, i just bought new inner and outer wheel bearings from timken.Can someone tell me how to adjust them right?! by the way my 620 is the only one in germany on the road and i just want to keep him there! Greets

Hi Guys, this is my first post here! iam sitting in an 1975 Lil Hustler and a can say its the only one in germany or one of 2 but the other doesnt work :)....so coming to the point: i do have some ignition problems with my J15 engine. my distributor shaft has too much radial tolerance in the inner housing. so that the ignition timing cant work correctly. Its an Hitachi D413-92 My question is: do you thing an electronic ignition can handle this problem or is the only way to buy new distributor ? Thanks a lot for your brainworking in advance!