geistnoahg

Where do you wire it into the distributor? That's the part that I am confused on.

Hello again! I'm trying to wire in an inductive loop tach into my '92 Sunny truck and I'm having issues finding the right wires to make it work. I know it's different from a 620, but I assume the wiring should be roughly the same. The confusing part to me about this is the wiring from the distributor. I have mine ran from the positive side of the coil into the loop and then the other side to the ignition barrel black and white wire. I got some movement out of the needle, but it doesn't read my idle or anything like that. I'm running out of patience and I'm about to throw a generic tach that wires straight to the negative side of the coil or buy a super expensive 620 tach that just uses the one wire to the negative side. Can any of you guys help me out? http://datsun1200.com/modules/myalbum/photo.php?lid=2708, if this link works this is how I currently have it wired into my truck.

Hello there Ratsun! As I was driving my 720 across town, my truck died in an intersection and now won't start back up. Checked all the systems and now I have no spark. New plugs, wires, rotor, cap, and coils. Tested the coils and they're still good. We think we narrowed it down to the module inside of the distributor, but unsure about that. Any help? Thanks guys and gals.

Thanks you guys! I really appreciate the help! I'll call around to the dealerships in my area to see if they have one, hopefully, in stock.

Thank you Dazenmike! I'll be sure to post this in the classifieds!

Hi there Ratsun, I'm in need of help with finding a VCV for my 720. Mine is broken and I'd need a new one or a used one that still works. Can anyone help me with links to buy one, or even one for me to buy if anyone has one laying around? Thanks guys, Noah