Jump to content


emripires

Member Since 06 Aug 2016
Offline Last Active Apr 23 2017 05:36 PM
-----

Topics I've Started

620 brake issue

18 April 2017 - 06:37 PM

I've recently installed the Mike Klotz hardbody conversion to my 76 620.

 

Here's my setup:

 

v6 Hardbody callipers, rotors, pads, lines etc.

15/16" master cylinder

Oem booster

rear Oem drums, no proportioning valve or residual valve.

 

The issue I'm having, is the front brakes always have a bit of pressure, rears have none like normal. The brakes work fine when I want to use them, but when I'm off the brakes, the fronts are always a bit on.

 

I have tried adjusting the brake pedal bolt in and out, made no difference. Brakes still drag...

 

Does anyone have experience with this problem who can maybe point me in the right direction?


620 flasher issue.

16 March 2017 - 07:11 PM

1976 620 L20B

 

- Issue:

 

Right rear flasher doesn't flash, either bulb. Front works, left side works, all 4 hazards work. Brake lights work, but if right side flasher is on, it kills that brake light. I've metered out the bulb sockets in the rear, and it has relayed power, same as all the other sockets.

 

Does anyone have a similar situation, or a solution?