Jump to content


Member Since 13 Jun 2016
Offline Last Active Apr 12 2017 05:52 PM

Posts I've Made

In Topic: Kuryakyn hypercharger

22 March 2017 - 04:13 PM

Thanks for all the positive input lockleaf,DrvnDrvr & Distributorguy. It's the reason I posted in the first place, hell it's the reason I wanted to be part of this community. I always valued your opinion datsunmike I think you're a pretty bright guy. I was hoping to get some positive feedback from you but I guess you're having a hard time getting past what you believe is right or wrong for my truck. When it's done and if it works I'll post a picture.

In Topic: Kuryakyn hypercharger

20 March 2017 - 08:15 PM

I've got a small filter to fit on the valve cover, and you're right it's only an air filter. The whole reason I'm sharing this is if this has been done before,is the vacuum on a Z24 strong enough to hold the butterflies open so the air filter can do it's job. I put a straw over the tube where the vacuum line will go and I sucked as hard as I could, it opened the butterflies about halfway. Need to try plugging it into a vacuum line on the truck and see if it will open all the way.

In Topic: Kuryakyn hypercharger

20 March 2017 - 07:10 PM

I won't be using my original hood, I picked up a spare last year its got a few small dents. If it doesn't look good it's not a big loss. Before anything gets cut I need to see if I can get the hypercharger to work properly, if it doesn't work I'm only out for the price of the part and my time and effort.

In Topic: Kuryakyn hypercharger

20 March 2017 - 04:34 PM

If I were looking for a power increase I'd do a motor swap.This is just to have something a little different

In Topic: Kuryakyn hypercharger

20 March 2017 - 12:05 PM

.Exactly my thought, fab up a short intake tube, cut a hole in the hood and you have a mini blower look. Except for the offset.