Mike411

Also. Was looking at the read axle and wondered how much power those can take or what works to swap

Yes mikerl411 I was. I know it's probably ly not going to be easy but manual is going to be so much more fun.

Well Its going to be a manual, don't want an auto. What w trans are you running and what engine?

Jesse, looking to keep it all nissian if at all possible and looking to put a turbo on it. Don't need ungodly hp yet. I've heard to of bodys not being strong enough to.

I've thought about putting a rack and Pinon in for p/s, I'll definitely check out jfbrinks, channel. Thanks

Thanks for the input guys, I definitely don't want to start hacking away at the firewall yet. Just want something with more power and efi.

Looking at putting a sr20det in my 411, looking for pros and cons. If any one has put a efi engine in and what it's going to take when it comes to the wiring for the ecm. Any help and comments are welcome thanks.

It probably will just have figure out how to get the stock shape agian most of the foam that was under there is gone.got the dash off lastnight.

Okay thanks that helps tremendously.

Not quite sure how to upload pics, but all dash pieaces are there I just need to know how it comes apart to get the top recovered

It's all there but the top is all cracked. I'll take some more pics tonight.

New to here, trying to get the dash part to replace the top section to recover it. I have no idea where to start. Also if anyone knows of where to get a new one.