chrumo

Ok, so my EFI sends power to 2 injectors but the rest 4 are not running. Some pins are missing on my computer, this can be the case. Can this controller be repaired? Please see pics http://imgur.com/a/bAGSg

When I bought EFI was missing. I bought A11-601000, should be ok, maybe it's just broken?

Hi Guys, I'm very much beginner in this topic and I restoring my car with some freestyle mechanics (how I would like to call them) I bought a car without EFI controller A11-601000 - as I have 280z '77 on California specs. So when I start the engine it runs for a 3 seconds and stops. Fuel pump and filter works fine. But when we checked EFI controller receives signal but doesn't gives back. Did you try fixing computer? If yes how to approach this. Another thing is that amount of active pins on computer is different from those on connector. Does this matter? Thanks a lot, hope this makes sense. HELP :)

Hi there, I searched many forums didn't find clear answer for this. I need to replace all rubbers in my Z. As this is easy to find kits for coupe, I struggle to get 2+2. I know people used Kia Sportage rubbers as a solution. Anyone did it for 2+2 from scratch and can what worked for him? Thanks

Commander, roger that, so what's this then? http://imgur.com/ws1HtWI

Guys the air flow meter has serial number A31 - 601 000 - and my new EFI computer A11-601000, is it correct then?

Thanks guys! I took the engine out as I started body work. Will inspect everything as there was a big mess. @datzenmike - how you are getting all those serial numbers for EFI controller? Where I can find them?

Thanks a lot! I'm totally new into this and I'm dealing with inexperienced mechanics so sorry for those questions that sometimes doesnt makes sense. So... there was a fuel pump problem - didn't have power, so the power is now going into pump but engine starts and stop after a second. I recorded a video. Have a look. Any idea?

Thanks! I got my precious efi controller, but the engine doesn't start or even spark. How I can determine if this unit is OK, and the problem is somewhere else? Thanks for support!

Thanks a lot for it! @Stoffregen - I have located few units thanks to this website. @Datzenmike - I have found EFI control unit with proper number A11-601000 for my automatic transmission - but from 78 model. Will it fit into 77? Thanks! Piotr

Hello, I'm starting my first project. Total newbie with Z. Sorry if this dumb question. There is engine computer missing in 77 280z. As I'm living in Dubai, spare parts are hard to get. Need to order online. How to find matching number for it etc? Thanks for help!