logicali

I have a bunch of w58 heads and this 210 head , and couldn't find a closed chamber one cheap ... So I figured a couple man hours and I'll be fine

This is a 1.3 exhaust valve

The 210 has small cc , so with the port and valve work , the compression on this thing should be good right? So right now I'm porting the intake ports to 1.4 they were stock 1.125 I'm going to polish it also and I'm going to get 280 Z intake and exhaust valves installed when I have the valve job ...going to put a W58 cam and rockers from my l20b stock head that I have sitting here I heard the w58 cam was very similar too the sss cam ,,, any input ?

does that mean these brackets are on wrong?? would any other calipers fit?

The rh one is on the left side and lh one is on the right side , whoever put em on , put em backwards

my parts store will let me return the parts if they dont what sholuld i try first rotors 82- 200sx or 82 maxima? calipers ???

OH MAN STAY SAFE,,, im in the sfv ca ... north hollywood area ... send me some pics

TOO BAD YOUR IN GEORGIA

IVE JUST BEEN PUTTING ALL NEW B USHINGS AND PUTTING A REAR END FROM A Z I HAVE A 4 SPEED AND AN L20B IM REBUILDING JUST FOR NOW...

yea right imA HOTT RODDER FAREAL .... NOT MY 1ST OR LAST PROJECT.... I KNOW MOST OF YALL NEVER CUSTOMIZED SHIT AND HATE... CUZ U CANT DO SHIT ..... BUT .....

do the numbers stamped on the calipers mean anything?..... does anyone know if these kind of brackets will let me use both calipers(200sx or maxima)? i just want to buy new caliperes pads and rotors and move on

story of my life

I have a 71 510 coupe and I'm missing bolts to attach my rear end , shock mount bolts , and a bunch of other random rear suspension hardware What car that I could find at the junkyard can I pull the bolts from ??? would a 80s 300ZX ??work would the 280 ZX work ???? I'm pretty sure all the Z cars from the 70s work correct(wont find these at junkyard)??