Trébol

Thanks for the info.

Thank you for the information. I am aware of the coil over conversion but what I am looking for is mounting the struts on the 1200. Will I need the Lower control Arm, Caster Rod, Balljoint and Knuckle Arm from the 280zx to be able to do this swap or will it bolt on straight to the 1200? Here is the link of what I am talking about. I just want to make sure if I do or do not need this things since I am getting mixed opinions. http://datsun1200.com/modules/mediawiki/index.php?title=SAP

Need help with information on what I need to do this swap. I got people telling me that I only need the top hat/camber plate to do this but reading on Tech Wiki it says otherwise. It says that I need a LCA/Rod, knuckle arm and balljoint all front the 280zx or similar.

Things done to my car. 88-91 13b Turbo. Rebuilt and Bridgeported by me. Had a small T-25 turbo at first but swapped to a 71mm T4 that at the moment is leaking oil. Soon I'll be getting a new turbo. Ford 9" rear end. Housing shortened with Moser axles and disc brake conversion. For the front suspension I am looking to do a coilover kit but still trying to figure out how to do it. I did a custom chasis wiring that I am planing on redoing since it is a mess. The floors got redone and soon I'll be laying down POR 15. Also I am planing on getting 280z seats.

Never heard of Canaderp. I was looking to buy the grille from them so I had my dad check out how much it will for him to ship it from Puerto Rico and it came up to $175 and that's not counting the grille. I found another website that sells the same stuff but it is in Australia (oldskoolpartsandpanels.com.au). Now the price came up to about the same of $175 but in Australian Dollar so if you do the conversion its a little cheaper. I believe it came up to $150 total.

Ups posted the quarter window twice. Here is the picture that I meant to put there.

Here's a little bit about my project. This is how I got it. This is after painting the engine bay and installing the engine and then I painted it temporarily. Right now is back to primer after sending it to a shop to take care of the body work. Witch I am not happy how the work work ended up so I am having them fix it. Found both quarter windows in a lot better shape than the ones I had installed.Also found a set of taillights that I'll be installing. There is still a lot to do but little by little is getting there. I am looking for a grille and a rear bumper.

I called them and they said they don't ship to US.

Hello from Tennessee. New to the forum. Here's my 1200/13b Turbo project.