Anton GX K

Hi Datzenmike, what other rings do you get for a nissan vq20 motor

I also want to know which oversize valves can I use, do you get a14 aftermarket oversize valves?

Hi I started wondering about boring out the block of my a14 to 79 mm per piston. Do you get a oversize piston for that or can you get it for the a15 or what other pistons can be used with the same connecting rod? Or what piston and connecting rod combination can be used with the least amount of special modifications?

Hi can some please tell me what the preload is on a datsun b110 gx?

Hi Mike i've got a question. Im busy with my H72 head now and I have a worry about play on the exhaust valve guide's. Sould I replace the guide's?

Thanx mike I'll see to it to definitely take your advice I'll post updates as I go and what route I chose. B.t.w are you some sort of mechanical masters engineer? Or just a datsun engineer cause it sound's like you know alot!!

Sorry i left out the part of turbo charging the engine. I thought the stock 1400 c/r was 9.5:1 but cool anyway, Can I put two standard head gaskets ontop of one another to drop the c/r?

Datsun gx coupe 1975 Hi can someone please tell me which piston to use that will give me a lower combustion ratio Im looking to get 7.5-8. I currently have an a14 engine that I am repairing. I hit big end bearings on 1 an 2 piston because of oil pressure