hustlepower

It does was a huge pain to find again https://www.facebook.com/marketplace/item/3052923148353026/

Looks complete and straight except the driver side fender.

Figured this is as good a place this as any. I'm putting the parts together to do the beebani D21 front brake conversion on my 521. For the master cylinder is the 280zx (disc/disc) recommended because people are doing all 4 wheels? I would think a 240z master (disc/drum) would work better if one is only converting the fronts.

I replaced my fuel pump, but it turns out that's not the problem. My truck wouldn't start and I looked and no gas in the carb thru the sightglass. I pulled the line off the fuel pump and no fuel coming out when I cranked it. I took the pump apart and nothing's torn, I can't tell if the check valves work ok though. I had a new pump, it looks like carnival prize quality but whatever. Stuck it in and still no fuel coming out of it. I think something wrong with line from tank to pump. Otherwise could be with cam actuation, but that seems less likely.

No thanks boss. Those lights are on the list to get off this mofo. If you'd like I can send so you can match in the front :)

HI all I've been lurking around here for a bit. Thought I would start a thread for my 521 since I'm gonna start some work and could use advice/abuse. I'll just lead with pics. On the side of my house Interior is not great but not missing too much. Blue originally I guess.