Here is the weber http://s556.photobucket.com/user/protolyfe/media/IMAG0147_zps5vkz5z40.jpg.html
and this is the bracket on the other carb http://i556.photobucket.com/albums/ss8/protolyfe/IMAG0148_zpslrtsfjzv.jpg
I have already put the linkage from the other carburator on. It does not bolt right up The old hitatchi had a bracket just above the butterfly lever that was screwed into the side of the carb with 2 screws" The weber doesnt have a spot for this bracket and the ones supplied bolt into the carb mounts on the manifold and those only work for the throttle cable design that comes from the driver side Mine loops over the valve cover and down to the passenger side of the carb
Hi guys i need some help here I just got this 32/36 weber carb from redline and there is no bracket with the kit that will hold my throttle cable in place.
I already swapped the old butterfly linkage over to the new weber and it works like a charm but i need a bracket that will hold the cable in place any suggestions? (mines the style that goes over the valve cover)
Hey guys I'm new to Datsun crowd and I'm looking for fun engine swap ideas for my 1979 b210
It's got an A15 in it now with auto trans
what's a good engine trans combo people usually run in these cars
I was thinking an I6 from a 240 would be cool but would it fit?
Its in and all put together. I just wanted to know is the 728 403 a wet inlet variation of the 728 402 head? So are the heads identical excepth for those holes
Looking for some information on my A15's Cylinder head 728 403 I have been through the wiki a few times and I cant find this head any where.
I found a 728 402 head but no 403. Its a round port wet inlet closed chamber the 402 is a dry inlet Any gurus out there?
Thanks for the info mike. Much appreciated. I was looking everywhere for some info on this thing and all Ive been able to find are blips here and there about it.
The plaque in the engine compartment is wiped clean all thats left is an imprinted number on it and the the door jam plaque is also missing
Hi guys I'm new here to the Ratsun forum. Recently picked up a 1979 Dastun 210 and I'm having trouble figuring out what year it actually is. So this "79" 210 says its an 80 on the title but it looks like a 79 it has round head light, but the engine is an A15. Which only came in 1980 no 79 so the internet says. If there is anybody out there with some info that would be Awesome!