Thanks guys. I'm glad I don't have to remove both engine and tranny. I looks like a pain because this one has A/C. i will get this project done when the weather gets better. Thanks again for all the great info
Hey guys I need to change the clutch in my 78 200 sx. I see in the repair manual that the engine and transmission is to be remove together. Is this true? Is there a way to just remove the transmission in order to replace the clutch?
Thanks
Someone here hopefully will know where the flasher for the turn signal is located on a 1978 200sx. The front passenger side turn signal won't work, but the 4 ways work. I assume I need a new flasher.
Thanks
Got it fixed. You guys were right on. Adjusted the carb per Weber instructions, runs great. Thanks again I would not have thought it would be the carb.
Just rebuilt an A14 for my B210. Started it up yesterday and there is a miss. I have new plugs, wires, cap and rotor. I adjusted the valves after the rebuild. The only thing different now is I installed a Weber carb. Not sure where to start. any help would be great.
Thanks
As you can see I am new to this stuff. I just installed a remanufactured head on my 77 b210. Is there anything I need to do to purge the air out of the head? Any advice would be appreciated.
Thanks
I'm new here and have a question. Just purchased a 77 b210 and have a chance to get some parts from a 1980 210. My question is what parts if any are interchangeable. I am looking at the steering box and a rear bumper. Is there anything else I can use.
Thanks for your input