Urbanassault

I fount some on rock auto that work not right but work none the less I had to get something beings I was missing both sides due to weather checking but the brand is metro and the P/N: VS3 you can find it in the tools and universal tab and then click on quarter window and it should be towards the top and then when you get them just slide out the old seal and install new seal with silicone to use as a lube and glue mine has worked wonderful and you'll have ro trim the bottom of the seal so when you roll the window all the way down it won't catch the seal on the way back up just make it look like the one you took out and you'll be fine now does any one know where I might be able to find the window scraper that goes on the bottom exterior of the side windows that would work for the coupe

O and just so every one is aware the door light comes out as an entire peace not just the lense don't do what I did now I have to re glue the lense to the housing that was a gut shot when I herd the plastic snap and fall in my lap

Morning everyone so I just bought this car about a week ago and on the 200 mile journey home had a lot of time to look at the interior and I noticed the headliner was starting to fall down and was just stretched super tight no longer attached to the fiber headliner board so I decided to do some thing about it went to JoAnn fabrics and picked some black microfiber couch/upholstery fabric that I thought would look good and stretch around all the contours I am using the locktite brand spray adhesive for there heavy hold and seams to work very well so far a lot better then super 77 but two cotes on the fabric and two cotes on the board wait about five minutes and had the wife hold the fabric while I laidit down not to bad for a Thursday night a few beers in the system here is the progress so far and I'll have more this after noon when it warms up and isn't 16deg F in the garage all that's left is to trim and wrap the fabric cut out holes for lights, seat belts, & Oshit Handles

Where did you get the new windshield and do you know if I can get it sent to the US mine is toast

26, 71 510 wagon bought for 100bucks got motor running got it titled sold 4months later for 300 not bad for pulling it out of a junk yard that it has been sitting for over 20 years

There is with the 8in wheels I had probably close to 3inches before I would hit the strut so I could stay with 8s but we'll keep all the wheels the same size new stock rubber is on the way 9am tomorrow morning just hope the wife remembers how to drive a standard mabie I'll take her out tonight and have her drive in a closed parking lot after the kids go to bed

Dam I was looking at the seal last night and it looks like I might be able to take that bracket apart and remove the old rubber I did find out that the style of rubber seal is still in production just have to figure out how to put it in that carrier an re attach to the window

Ha ya agreed they do look off I had them on my 200 and got them cheep but no the wheels will be flat black when I get around to getting new wheels probably gonna go with a 15x6 but just got done putting the stock wheels back on and gonna go in tomorrow and have new rubbers put on fenders will stay as is and I'll build the car and put wheels on not change the car to put wheels on thanks for all the feed back

Ok my bad on the first picture post but you can see the tires and I'm share if I rolled the fenders this would stop being so bad but I'm not to share how to roll the fenders I've watched some videos but still really don't want to try and f it up so if any one has any good ways to do this any help would be awesome,

Hey everyone need some help finding wheels that will fit with stock suspension I need something that will fit in the well and can accept being lowered and not interfere to much just installed my 15x8 +0 and they don't fit at all I shreaded the rear wheels not a good sign but they Shute did look good

There is a shit ton of hail damage but I think it adds character o and the window seal that goes in between the two side windows does any one know how I can get a new one or just the rubber seal to replace it, there is no seal left on the driver side and the passenger side is so brittle that it's about to break so kinda need to get this fixed any help finding suitable parts to repair the old girl would be wonderful and yes drove all the way to sd just to spend a hour there and then driving back home driving time was about 7hours