Low73620

Got it, bad connection on the relay. Thanks!

when hi is selected all 4 light up...

no inner lights - no outer lights, with the lo beams on

new issue with my daily driver. My lo-beams stopped working. still have highs and all other lights.. i do hear a click sound from the the front right side of the truck when turning on the switch. Thinking its a relay, is there a replacement? Thanks

Well it did slip a tooth and i must have been really lucky. because after putting it back, it fired right up! Thanks datzenmike and all who replied... Ratsun saves the day, again!

Well looks like the gear did jump. Definitely not at 10-2. Is this tricky to put back?

Looks like the spacer is missing. Probably why the pump arm bent. When I bought the truck the EFP was already installed. There was a block off plate on the head. Until recently, I never found the EFP a problem, always seemed to provide adequate fuel with low pressure for the Weber. Turns out there was an inline fuel filter before the pump that was clogged. I'm going to have to remove the Valve cover again an check the location of the cam lobs. I just checked the timing marks.

Sorry forgot some vital info. L16 with Weber 36/32

So here is the deal, I installed a new mechanical fuel pump after my electric pump was giving me issues. Drove a half mile and the eccentric came loose on the cam. I then removed the valve cover and tightened the bolt. Well seems I bent the fuel pump plunger. After messing with it for a while i decided to go back and just replace the efp instead. Now while the valve cover was off I put the motor to no1 and checked timing marks on the cam gear. Looks good. I have spark and fuel and still no fire. No pop or anything. Any ideas what could have happened by the eccentric cam gear from coming loose?

I also have a 65 sedan and a 60 Ranchero, all in that Falcon family.

If it moved people it was a Falcon, All others were Econolines.. I have a 66 Falcon

Thanks Micro. but, I did locate one, it should be coming in today!

Nice! Job on the Isolator! I've found a front half drive shaft, should be getting it today. Looks like i'll have this thing back on the road sooner than I thought. I miss the little bastard..

Man I wish it was closer to me, I need a drive shaft to do my 5speed in my 73. Somebody get me the front half of the drive shaft, PLEASE!!

Looks like I'm in the market for a front half drive shaft. Thanks Mike.. I saw in few of your posts that you repaired your drive shaft center support isolator bushing, Do you have any pics? Thanks again