zenger

It was the first thing I've checked, belt is not loose, all wires are fully connected. @1k RPM, voltage is low, but at 2k RPM, it is at 14.3

Hello all - I'm a newbie to this forum. I have a 1975 280Z, alternator is only charging 11.3 volts aat 1000 rpm, idle speed, but produces 14 volts at 2000 rpm, is it the alternator, or voltage regulator? Please help.

Thanks. Will check it out

I'm looking for use parts, but thanks for the info, I can have it as backup.

Hello guys, I'm looking for a driver side Door Sash, and window regulator assembly for my 1975, 280Z, 2 seater, but I haven't had any luck online. (used parts), any idea where I can locate? The red pointed arrow outlined the parts I need. Thank you in advance.

I'm new to the forum, and need help with wheel fitment. I'm planning on getting the Panasport 16×7 zero offset similar to qwik510 setup, and planning on dropping my 75 280Z by one inch. Will i be required to roll the fender with 225/50/16 tires? And what is the offset of your Panasports? Is your car lowered? If so, by how many inches? Best regards. Z