Malachi

I would pickup one as well

Looking for a set of 620 hood hinges.

Here's a list of a few things I can bring if anyone is interested. -3 full Sets of 280zx rims with lug nuts: 4 spoke, 6 spoke, and iron cross. -280zx front struts with hubs and brakes. -79 280zx 5speed trans works good. -74 620 4speed trans works good. -83 280zx r200 3.90 diff. If you want 280zx parts I have a black 79, silver 83, and white 83 I can pull stuff off, so let me know in advanced.

Could you please bring a front windshield for me?

I'm looking for a rear drivers side door for a 510 sedan. It doesn't have to be in perfect condition.

I'm looking for a dual side draft intake manifold for my Mikuni's.

No they are 280zx rims

Since the last update I have added a rear sway bar, t3 kick panels, and a front air dam. here is a updated picture of the car.

The radiator is holding up good I have about 7000 mile on it now. I'm not sure what size spacers I cut them all to get the rad as close as possible. I put the thermostat below the upper rad hose it was the probe type.

I've got a few things done this summer so far. First thing I did was installed a cheap little tach on my steering column. The Tach works great and can't be beat for the price. I than installed my dual electric fans that came with my radiator, with a Hayden adjustable rely kit that works excellent. I had to offset the fans to make them fit. Next I bought a turbo thrust muffler and payed a local exhaust shop to run 2in pipe form the down pipe back. He did a nice job on the angles, It's a good 1in-1.5in high than the old one. No more rubbing on speed bumps when I have 4 people in the car. The exhaust sound is nice and deep, plus it's not as loud on the freeway but louder when I put my foot down. The latest thing I have done is replacing the window felts with new ones form Taiwan. WOW! what a deference, the car sounds so much more solid when I'm driving it.

where do you autocross?

Are you happy with the Noico sound deadener? I need to do the same to my car.

I did a couple things to my car last weekend. I cut the unneeded brackets off my throttle linkage. I bought some new rims that popped up on craigslist, sadly the tires are cracked and I just got new tires on my other rims so I will not be running the new rims for awhile. I also installed my brake booster and it works great. I bought a line bending tool at harbor freight, used it to bended new brake lines for the master.

I had a great time at the Datslocos show in Manteca, here are the goodies I bought. I got this brake booster, I hooked it to vacuum and it seemed to be working properly. I will need to bend new lines from the master to the junction block and I'm going to uses a 15/16 master I got off my 280zx. I also bought these rocker trim pieces, it's hard to see in the picture but they are very strait and dent free. I need to make brackets for the ends. And a yellow Ratsun decal, I put it on the more ratty side off the car B)

Today I had my car aligned at the tires shop, in preperation for the Datsloco swap meet being that it is a 3hour drive for me and my car was pulling slightly to the side. Here are the specs. Currently I don't have adjustable TC rods. The guy at the tire shop said my Caster should be some were between 1.5-2.5 degrees. I'm wondering how much caster you guys run, I drive my car daily but I care more about handling than tire life. Also I plan on auto crossing.