I bought it for about $500 the engine is running perfect. I put in four new plugs, the two front shocks, an engine mount, and replaced the lower arm bushes and the ball joints. I also got the carb cleaned up changed one of the jets and had to change the iginition coil cos there was a slight miss. Cost me about $200 for that bit.
Ok so now that I know it's a 610 apart from the fact the the papers say the engine is an l18 how else can I make sure its actually an l18 engine. The running repair that are left to do so far is the fact that there is a play in the steering box and after i get that done only the allignment. The body is really bad though. Although some of the pictures tell a different story. The floorboard in the drivers side is almost non-existent. An everytime i take the car out there pieces of rust fallen off part of the car in my garage. Im saving up to get the body done. It'll probably cost $1500 at least to get the whole thing done and painted. So back to my question. How do I know what the engine is and its capcity. Apart from what the papers say.