71pl510

yep I figured I would need to mod the manafold some and this and that, I was hoping one of these kits would have enough of the pieces to jig saw it togeather

I just got the s13 sr20det that will be going into my 510 2 door and I have a few questions 1st does any body have a link that I saw a few years back that lists the minimum parts required for a sr20det to run i.e. maf, ecu,etc. or in other words what all can I take off. 2nd does anybody know if any of the kits for the sr20det 240sx from ebay for example are of any use in a 510 I like the cast iron manafolds that are included most likely the radiator won't work (too tall) the intercooler should work and the pipes but not sure how good the turbos are seems like it might be a good way to get most of what I need in one shot then maby replace the turbo down the road when more funds are avalable. example: http://cgi.ebay.com/ebaymotors/NISSAN-240SX-S13-S14-SR20DET-ENGINE-TURBO-KIT-32-FMIC-/150656535273?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item2313d44ae9 yep I think I have read nearly or all the build threads Thanks

Thanks good tip to get the old underdash unit checked out I guess I still need to know if the stock s13 ac pump will fit in the 510 and I guess I need the condenser and a place to put it it seems like it is already going to be a chalange with the intercooler mounting.

anyone done this I have a stock under dash ac unit and will be swaping in a sr20det soon just wondering if anyone has any first hand expereance with this type of setup 71 2 door 510 soon to have a s13 red top thanks

Weekend's almost over what did you do? yesterday I welded in a new pannel where someone cut a big hole in my rear shelf, today I did the mazada wiper motor conversion and painted my lca's and wiper bracket

Let us know how the coilovers work and the price/part# please Looks like a nice friday project

Ok so I wanted to make a dolly for my 510 2 door shell all glass removed seats out motor out etc. etc. anyone have any idea?

Not sure how low yet I have a coilover kit installed but no rims yet this car was a non runner when I got it I will need to clear the average speed bump so short story long dont know.

What year mr2 inserts for 280zx struts are people using? Part#? I am going to be re assembling all this next week. Thanks

I have an extra vlsd 3.54 if your interested

This looks like a great setup If I go with something like this do I still need a camber plate or can I adjust from the bottom and use stock hats.

I scored a subi r160 lsd 3.700 at my local pic and pull tomorrow I go back for the 280zx struts I saw. dibbs on the struts by the way

for any truck guys out there My link

Thanks , what I need is someone to take the rest of the car after I take the struts/brakes I will put in $100 so I need someone to take what's left for $300