magician

Thanks guys but seems that it wasn't too much water that got in,ur help was much appreciated!

I've taken out the intake while I was doin so water got into the inlet,I jacked the rhs and tried to get as much water out with a shammy.is it gonna cause me problems?wat should I do

That's what I'm dealing with !

http://s1064.photobucket.com/albums/u375/magician/?action=view&current=utf-8BSU1HLTIwMTQwNDI5LTAyMTIyLmpwZw_zpsd1acda35.jpg

Thanks banzai

Thanks,I'm going to try putting it back to original state and check if oil still pushes up,ir so im going to have the motor overhauled.

The pic I sent is similar to th engin I have

http://i1064.photobucket.com/albums/u375/magician/Mobile%20Uploads/12846_zps3d085510.jpg

<iframe width="480" height="360" src="http://s1064.photobucket.com/user/magician/embed/slideshow/Mobile%20Uploads"></iframe>

Its almost similar to the picture just that it doesnt have the orange pipe it just has a hole in the same place,I have a pic of watim talking about justt that I'm new here and dont know how 2 post it here maybe u have an email I could send it 2 u.are u also sayn that its normal for oil 2 push out if the pipe is missing and I dont have to change oil rings?

please give me some advice,I have just bought the car and its pushing out oil from a hole under the manufold.I assume its a breather.before I Change rings and bearings just wanted advice.its a l18 motor