Jack1950

Thanks, I will give that a try. The hole in the center will have to be drilled out. Thanks for the suggestion.

Went to replace my strut rod bushings and the cups the bushings sit in have worn out and broken off. Anyone have a solution?? It is by the arrow on the left, the bushing cup is spot welded to the bracket the rod goes thru.. The cup keeps the bushing centered so the rod stays centered. Any help much appreciated.

If you have the stock carb (electric) you loosen the three screws on the chock heater cover and rotate it in the lean direction (marked on cover). Mark sure your electric chock wire is plugged in and getting power.

Had the same problem. Found proplem as a bad fuse connection on fuse #2.