Jump to content


Member Since 11 Mar 2014
Offline Last Active Today, 06:08 AM

Topics I've Started

510 2 door 1/4 window trim

19 December 2016 - 03:04 PM

I'm wondering what people have done for 2-door 1/4 window lower trim?


4-door 510s have the chrome trim at the top of each door but most 2-doors (Not Coupes) I've seen,

still have the trim above the doors but not along the lower part of the 1/4 window. 


Anyone have any ideas of what to use here? I don't think I would want to cut up a 4-door's back door trim ...




Weber DGV 32/36 using Factory Linkage

18 April 2016 - 11:37 AM

I've got a 32/36 installed in my 510 with an aftermarket pedal and cable set up.

The cable works fine but I would like to switch over to use the factory linkage.


My question is: what are people using for throttle levers?

I don't see anything that weber makes that would work so I'm guessing custom or using the lever from a stock hitachi unit?


Here is a screen shot from a video of a gentleman who appears to have the same setup:




Part number 33 is the lever from the Hitachi Carb Below



L-Series Valve Cover Breather Tube

26 January 2016 - 10:39 AM

I'm going to get a valve cover powder coated and I was wondering about the discrepancy I've seen in the direction L-series breather tubes are pointing.

My question is; is the direction adjustable? ( It's now pointing towards the back passenger side of the car and I would like it pointing towards the carburetor)

Also what is the material used when fitting the breather in place?