Drew_B

Ok so it's been awhile since I last posted but here is where I am so far.... Got motor in the truck and wired up.. Had a bit of trouble with the wiring but we got it figured out and the truck starts.. Things still needed to be done: Botton up wiring Rhino line the floors Mount seats Decide if imma use stock dash or build a dash (since truck has no heat or air) Lower the truck to the hight I want it at Find over fenders that will work with the body shape (any ideas let me know) Fix rust on the bed (or buy a bed with no rust) Paint the truck Matt black... Wiped off half the truck (the black is 5 months of tree sap and whatever eles stuck to it)

Ok haven't posted in awhile bc of work but I'm still making progress on my truck Got motor mount made Painted bay Got motor in truck Pulled dash to start cutting wiring

Did you get your motor into ya 720???

Ok guys here's what I got done yesterday.. More cab prep for rhino line, hope to have it sprayed Tuesday or wednesday.. Got the engine built - all but valve cover and oil pan... Bare block and my 720 Crank is in and torqued Now for those shiny new pistons After that we sprayed the engine to make it look new.. Turned out nice Head on and torqued Cam and rockers How it sits for now until I can get a intake manifold, water pump and thermostat

Thanks.. First time build thread writer.. But will be posting pics along the entire build

This here is my little datsun.. Bought it about 6 months ago from some guy that didn't want it any more.. It was just sitting behind his house wasting away soo I got it for cheap... Drove it home thinking it had a blown head gasket.. Bought a gasket kit, pulled the head and there was a lot more damage then expected.. Soo I did some research and plan on ka24e swapping it! Bought a 90 HB donor truck.. Pulled motor and rebuilding it.. Plans: *ka24e swap (rebuilt, bored .20, rebuilt head, polished crank, new pistons) *stage 2 clutch *clean engine bay up some (mild shave) *rhino line floor in truck *put 2 race seats in truck (had laying around) *lower truck 2-4" *fix body/rust damage *flat black paint with over fenders *tint windows * DRIVE THE HELL OUTTA IT!!! Ok now to the pics... (Sorry in advance if they are big kinda new at this) Donor truck Donor truck motor that 4th piston was froze up in Pulling sound deadening up (prep for rhino line) More cab prep Motor is back from shop.. That's all I got for now I will continue to post pics. of my Garage Build.. Any comments welcome.. Thanks for looking

Ok got the pics posted sorry so big... Idk how to fix that...

Would love to post them but I don't know how lmao....

Hey everyone new to ratsun, been reading and looking at post when I Needed help on things... I have a 1984 720 single cab.. It had a z24 in it when I drove it home.. Bought the truck thinking it had a blown head gasket... When I took the head off there was a lot more damage then I thought sooo I'm currently swapping a ka24e out of a 1990 HB into it.. Any help or advice is appreciated!

Hey man noob here and was wondering how you wired up ya ka24??? I'm building a 720 myself and have hit a speed bump with the wiring.. Any help would be great Thanks!

Hey guys long time reader 1st time writer! Total noob but just wondering if anyone could help me? I'm swapping a ka24e into my 84 720 and I'm no good with wiring and was wondering if anyone could tell me what is needed and How to do it... I will be using and 89-90 240 intake and engine harness.. Any help is appreciated