Hern88ndez

Just simply amazing

Found lug extenders(12mX1.25) but if anyone has the 280z flares ill be more then happy to pay.

So installed front shocks today....achieved that even look I wanted. Still have to install rear shocks(ordered the wrong ones) going with Monroe. Still waiting on bushings to come. http://m.flickr.com/#/photos/114935936@N07/12138373096/ http://m.flickr.com/#/photos/114935936@N07/12137733955/ http://m.flickr.com/#/photos/114935936@N07/12138052703/ Has anyone ordered lug extenders for their 620?(if so what's the site) also looking to purchase 280z flares(anyone have any For sale?

I hear ya; thanks for the advice, will keep ya updated. Def will look into moving the shock towers up heigher. Thanks Aibast.

I looked around and the 4" blocks you do need new uboltz. I don't scrape now, I do bounce but that's normal. Ill wait to add the 4" blocks till I add the shocks and springs. Thanks GRpufnstuf

Awesome will do thanks

Also went ahead and ordered the leaf springs. To add the 4"block can I use the same system or do I need to get another kit?

I have read more and your right. I'm ordering kybs and pintos. Now, should I go to 4" lo block? And 720 4x4 leafs?

Thanks KING RAT; I guess the only way knowing is by trying.

Looking to achieve the look of the flat yellow 620 on my link, low and even in the front and rear. Any advice, guidance, sugestion?

620 running strong. Now to start, I took the last week to read all 58 pages on the 620. So far what I know about how low it is from the prev owner that I bought it from is that it has 3" blocks in the back and adjusted torsions bar in the front. So what I read that people have done or advised to do (reindexing my torsion bars,bag it, takeing out the bump stops, running shorter Shocks, riding cranked(what does that mean)?, raising shock towers, using 720 4x4 springs, low profile bumps, running pinto diplomat ky b toxic shocks. the links shows my 620(black) it's at angle the back is lower the the front is higher, I also linked a pic of what I want to achieve. I will be running 15x7 wheels. I def don't want to bag it or reindexing my torsion bars. Looking to achieve a even low look. http://m.flickr.com/#/photos/114935936@N07/12041465884/ http://m.flickr.com/#/photos/114935936@N07/12041692013/

Fixed...she alive and kick strong. It was a simple, the problem was loose ignition wire to my Ignition switch. Now to the next post. Thank y'all for y'all thoughts. Will keep in mind for future problems.

King rat I did but I ain't going lie did not know how to bump the post new do y'all can repost. Dr.feltersnach will check in a few

So off from work today and found that maybe the relays are not working. Went to peps,AZ,Napa and car quest and they did not have relays(inhibitor and ignition) that I need it. I search eBay and nothing. Where is a good spot that has datsun parts in general?

Will do, found them and found a Manual for the truck, learning as I go Thanks for the knowledge. I will let y'all know still trying to get her back and running.