damdcow

By the way... hi red!

I am an extremely heavy vaper. All day everyday.

previous owner used wood screws to install the flares, but i removed and riveted them on. so i re-installed them myself lol

The wheels are diamond racing 16x8-51

Sorry if this has been covered. I searched and found a bunch of info on ZDDP (zinc) oils, but nothing on detergents. Any pros and cons you guys know about? What should I be using in my fresh rebuild vs a 100,000 mile motor? Thanks for you wisdom, guys!

I just replaced my HG this past weekend. It had some imperfections on both the block and head. nothing major, just tiny bits of pitty and scratches. I used copper coat on both sides of the head gasket... Started right up and ran better than ever and i've already put 200 miles on it with no issue. Moral of the story: if you have 2 perfect surfaces, dont bother using it. If you need to fill (minor) gaps in the surface, use a bit. If you've got major damage and you're cheap, slather it in copper coat but dont ever expect to get them apart again lol

I'm really loving that windscreen shade!

Done with the headgasket swap, guys! wasn't all that bad. I LOVE the ARP studs. made my life easy this weekend. Thanks for your help, guys.

ive done that before with my buddies mr2!

Blew my headgasket. spent from 6pm to 11pm tearing everything down. All the surfaces looked clean and strait so i'm just gonna slap another gasket on there and hope for the best!

Thanks guys!!! The wheels are 16x8-51mm and I LOVE the mirrors. if they're aimed properly you have almost no blind spot. but they're a pain to adjust.

Haha, I'm not new to the game, but I also haven't been around long enough to be "old school" I eventually plan on putting a KA-T in it. As for the seats, they're prelude seats with the slider still on. There's no way in hell to slide em cause it's so tight in there... but they're there.

Hey guys! I've been on the Ratsun Facebook and a lurker on here for quite some time. 1974 620 bulletside.

PO put Honda Prelude seats (older) in mine. Very sporty. Need to modify the brackets SLIGHTLY but nothing difficult at all.