Chris#51EPGraham

Good karma, yes. But you also saved the whole front end of your car, lol.

I assume you mean sedan and not wagon? I have a couple of pairs @ $50 + shipping.

I've got 200mm L16 flywheels for $36 shipped.

Just for the record, I have 3 or 4 used ones in 215-60-13. They're probably usable, but not worth shipping.

I have one from a '74 610 L20b for $20 shipped anywhere.

I have an actual '69 windshield (light green tint) but it would cost over $200 to FedEx to CA. Location, location. Anyone near me need 0ne? Also have two 510 sedan back windows.

I have a couple of two groove L16 pulleys, either one $27 shipped. I'm not sure if they interchange on an L28 but can work with you on measurements. I have a third L16 pulley on which I machined the pulleys off in order to use detachable underdrive pulleys. Never finished the project so sourcing pulleys and drilling holes would be needed to finish. A machinist gizmo inventor type person might be interested in this item.

Bump.

FYI, the OEM 510/610/710 Hitachi *downdraft* main metering jets physically interchange with Weber DG?V main metering jets. Same threading and they've worked fine for me. Good way to expand your jet collection if you have junk Hitachi downdrafts laying around.

Bump.

I have one of these exhaust manifolds left: Exhaust manifolds - early 4-2-1 "A26". Air injectors removed and tapped for 1/4" NPT allen head pipe plugs. Flange end drilled for 5/16" bolts so you can use readily available size of stainless. Have 3 of these, price - plus shipping ------------------------------------------- $40 each (two SOLD, one left) Link to photos - back up to thumbnail page for three more photos (#4 is the one I have left): http://www.flickr.com/photos/50853885@N06/5706169131/in/set-72157624202328584

I have '70 - 73 style LCA's for a PL510. One set stripped + repainted w/ reinforcing welds, late style---------------------------$60/pair, shipped Other sets in used cond, unmodified, late style---------------------------------------------$40/pair, shipped Have two hood latch handle/bracket/cable assemblies: [1] One original lever style for a 510 [2] One T-handle style from a 74 610. This is nicer than the 510 lever style and can easily be adapted to other models. Either of these = $37 shipped Here's a link to photo of the best pair of 510 LCA's I have: http://www.flickr.com/photos/50853885@N06/4669410062/in/set-72157624202328584 These have had the balljoint doubler plate reinforced with MIG bead welds. The other sets I have are average in condition, stock and not refurbished.

Bump.

Bump.

I've got quite a few used pairs of these, some pretty clean.