Jump to content

bazchch

New Members
  • Posts

    4
  • Joined

  • Last visited

About bazchch

  • Birthday 04/30/1976

Profile Information

  • Location
    new zealand
  • Interests
    cars

bazchch's Achievements

Newbie

Newbie (1/14)

11

Reputation

  1. but the colours you say are not thae same as mine mine has 3 sets of wires coming from the main ecu plug and one relay also how do i add the knok sensor wires to this loom as i dont want to blow the motor with out it wired up any one has a clue to do this im new to the sr wiring thing many thanks :(
  2. mine has 3 plugs coming from the main ecu plug. it was from a 1994 u13 bluebird sr20de non turbo 1st is 8 pin plug [white] white wire orange white,green stripe pink,black stripe big black with red stripe white small grey 2nd plug black flat style plug black orange with blue stripe green purple green with black stripe WHITE FLAT STYLE PLUG WHITE GREEN,BLACK stripe yellow,black stripe green,white yellow,red black yellow grey,red stripe green,brown yellow lightgreen,red yellow,blue blue,black yellow,green i have some pics of the loom and wires but not sure how to add them to here
  3. got an sr20de and loom and ecu from a u13 nissan looking for pinout to get this running,of the factory ecu. the knock sensor wires is not apart of the main engine loom any one know how to add these in to the engine loom[pins] car is going to be a track car , so i only need power and earth to the ecu pinout to a power switch, ' or do i need relays etc fans will be on a switch and fuel pump power straight from the main switch any help would be great would like to get engine wired and running before the roll cage goes in'' thanks baz:D
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.